4. Configuring Your Terminal
g.
Select
Edit
to key in the address for each of these parameters. To key in a period (.), press the
number
1
key then the
ALPHA
key. Contact your Internet Service Provider (ISP) to determine the
addresses.
•
IP Address
•
Subnet Mask
•
Gateway IP Add
•
DNS1 IP Address
•
DNS2 IP Address (your Ethernet network may not require this parameter)
h.
Select
Exit
then select
Yes
to save changes. CommServer restarts and the terminal reboots back to
the applications menu.
4.
Reconnect the
to the
and the wall jack.
4.4
Configuring Dial Backup Support for IP
4.4.1
Dial Communications as Automatic Backup for IP
With this configuration, the terminal will automatically attempt to use dial communications when Ethernet
communications is not available.
Note: Moneris recommends configuring your terminal for dial backup in the event that
Ethernet communication suffers an outage.
1.
Finish setting up communications for IP (
or
2.
Plug in the dial cable and follow the steps for Dial Setup under
Configuring Dial Communications
Note: Dial communications must be configured for Dial Backup to work.
3.
, select
DEBIT & CREDIT
.
The message "Activating App..." is displayed, then the transactions menu appears.
4.
Press the green
OK
key to access the CONFIGURATION menu.
5.
Select
Setup
OK
key.
6.
Scroll down and select
Host
.
7.
Select
Next
until “Backup Support” appears.
8.
Select
Edit
, select
Next
until “Auto Backup” appears, then select
Slct
.
9.
Select
Exit
, then select
OK
to save changes.
10.
Press the red
CANC ANNUL
key then press the * (
asterisk
) key to return to the applications menu.
4.4.2
Other Backup Support Options
None
- Dial backup is disabled (default)
Prompt Backup
- The terminal prompts for confirmation before attempting dial
Switch Backup
- Do Not Use
Use Backup
- Do Not Use
Moneris Vx810 Duet Operating Manual
71
