Mitsubishi Fuso CANTER FE85DE6SLGP, Руководство по ремонту

Страница: 55 / 336

11
11-17
• The feeler gauge cannot be inserted under the adjusting screw
pad without carrying out the above step, as the pad will block the
feeler gauge as shown in the illustration.
• To insert the feeler gauge under the adjusting screw pad, push
the pad at the bottom on one side with a flat-blade screwdriver
or a similar tool. Insert the feeler gauge into the small space cre-
ated under the other side of the pad, as shown in the illustration.
• The feeler gauge must have a slight drag when taking measure-
ments.
• If the feeler gauge can be moved without any resistance, the
measurement will be incorrect.
• If the measurements are not within the standard value range,
adjust the value clearance by the following procedures.
[Adjustment]
• Adjust the valve clearance by loosening the lock nut and rotating
the adjusting screw so that the feeler gauge can only be moved
with a slight drag.
• After the adjustment, hold the adjusting screw in place with a
screwdriver and tighten the lock nut to the specified torque.
• Recheck the valve clearance with the feeler gauge, and readjust
if the measurements are not within the specified value range.