Mitsubishi Fuso CANTER FE85DE6SLGP, Руководство по ремонту

Страница: 287 / 336

15-8
1.3 Turbocharger adjustments
• Follow the flow chart below when adjustments become necessary on the turbocharger.
<Inspection and adjustment sequence>
Measure boost pressure
Check for contact between control crank
and position bolt (see ( 1 ) given later)
If control crank fails to contact position
bolt (see ( 2 ) given later)
If control crank contacts position bolt
(see ( 3 ) given later)
Adjust actuator shaft length
Measure boost pressure
Check for contact between
control crank and position bolt
Adjust position bolt length
Adjust actuator shaft length
If boost pressure is too low
(see ( 3.1 ) given later)
If boost pressure is too high
(see ( 3.2 ) given later)
Adjust position bolt length Adjust position bolt length
Adjust actuator shaft length
Measure boost pressure
Check turbocharger
ON-VEHICLE INSPECTION AND ADJUSTMENT