Mitsubishi Fuso CANTER FE85DE6SLGP, Руководство по ремонту

Страница: 31 / 336

00-28
1. Diagnosis Codes
• The diagnosis code indicates the faulty location(s) of the vehicle.
• Reading the diagnosis code(s) and performing the corresponding remedy (troubleshooting) repairs the faulty lo-
cation(s).
• Diagnosis codes can be displayed in the following two methods. Select either of them according to the system to
be diagnosed.
• Using a Multi-Use Tester
• Flashing of a warning lamp on meter cluster
• The table below indicates the systems for which diagnosis codes can be displayed and the methods usable for in-
dividual systems.
1.1 Systems and diagnosis code displaying methods
1.2 Types of diagnosis codes
(1) Present diagnosis code
•
Fault developed in the vehicle after the starter switch is set to ON is indicated by corresponding diagnosis code.
• The fault warning lamp is lit at the same time.
(2) Past diagnosis code
•
Past fault developed in the vehicle is indicated by corresponding diagnosis code stored in the memory of the elec-
tronic control unit.
• With the vehicle restored to its normal condition or the starter switch turned from OFF to ON after inspection or re-
pair against present diagnosis codes, the present diagnosis code is stored as past diagnosis codes in the memory
of the electronic control unit.
• The warning lamp is not lit because the indicated fault is not present one.
2. Access and Clearing of Stored Diagnosis Code
2.1 Using Multi-Use Tester
(1) Connecting Multi-Use Tester
Special tools
Warning
lamp
System
Diagnosis code displaying
methods
Reference Gr
Multi-Use Tester
Flashing of
warning lamp
Engine
control
system
Common rail
O O
13E
Turbocharger control function 15E
Exhaust gas recirculation control function 17E
Preheating control, starter continuous energizing
preventing function
54
Mark Tool name and shape Part No. Application
Multi-Use Tester-
III
SOFTWARE DISC
FMS-E14-1 or
higher
(Multi-Use Tes-
ter-
III
version)
Data transmission between V.C.I and
PC
V.C.I. MH062927
Data transmission between electronic
control unit and PC
DIAGNOSIS CODES