Mitsubishi Fuso CANTER FE85DE6SLGP, Руководство по ремонту

Страница: 147 / 336

12-18
Disassembly sequence
1 Oil pump cover
2 Driven gear
3 Gear and case
4 O-ring
*
a : Drive gear
: Locating pin
: Non-reusable parts
Assembly sequence
Follow the disassembly procedure in re-
verse.
Service standards (Unit: mm)
Tightening torque (Unit: N·m {kgf·m})
Lubricant and/or sealant
Special tools (Unit: mm)
Location Maintenance item Standard value Limit Remedy
1, 2 Oil pump cover-to-driven gear shaft clearance 0.04 to 0.075 0.15 Replace
1,
*
a
Oil pump cover-to-drive gear shaft clearance 0.04 to 0.075 0.15 Replace
2, 3 Gear and case-to-driven gear shaft clearance 0.04 to 0.075 0.15 Replace
2, 3,
* a
Sinkage of each gear from gear and case end surface 0.05 to 0.11 0.15 Replace
Gear and case-to-tooth tip clearance for each gear 0.13 to 0.22 0.23 Replace
Mark Parts to be tightened Tightening torque Remarks
Bolt (oil pump cover mounting) 8.2 ± 2.46 {0.8 ± 0.25} –
Bolt (oil pump cover mounting) 9.8 ± 2 {1.0 ± 0.2} –
Mark Points of application Specified lubricant and/or sealant Quantity
Sliding parts of oil pump
Engine oil As required
O-ring
Mark Tool name and shape Part No. Application
Pump cover pin
MH063431 Installation of oil pump cover
A B
φ
7 20
0
–0.14
OIL PUMP