Mitsubishi Fuso CANTER FE85DE6SLGP, Руководство по ремонту

Страница: 111 / 336

11
11-73
Disassembly sequence
Assembly sequence
Follow the disassembly sequence in reverse.
Service standards (Unit: mm)
Tightening torque (Unit: N·m {kgf·m})
Lubricant and/or sealant
Location Maintenance item Standard value Limit Remedy
–
Backlash between
gears
Idler gear and fan shaft 0.09 to 0.14 0.3
Replace
Fan shaft and No. 1 idler gear 0.06 to 0.10 0.3
No. 1 idler gear and crankshaft
gear
0.11 to 0.13 0.3
No. 1 idler gear and supply pump
idler gear
0.12 to 0.15 0.3
Oil pump gear and crankshaft
gear
0.12 to 0.15 0.3
Oil pump gear and balance shaft
gear RH
0.19 to 0.22 0.3
–
End play of gears
and shafts
Idler gear 0.10 to 0.20 0.3
Replace
Fan shaft 0.07 to 0.19 0.3
No. 1 idler gear 0.15 to 0.25 0.3
Balance shaft RH 0.1 to 0.2 0.3
Balance shaft LH 0.1 to 0.2 0.3
2, 4 Idler gear bushing-to-idler shaft clearance 0.02 to 0.06 0.1 Replace
5, 8 Fan shaft case bushing-to-fan shaft clearance 0.03 to 0.07 0.1 Replace
8, 9 Fan shaft-to-fan gear shaft clearance 0.01 to 0.05 0.1 Replace
11, 13 No. 1 idler gear bushing-to-No. 1 idler shaft clearance 0.03 to 0.07 0.1 Replace
20 Balance shaft RH bend 0.025 0.05 Replace
25 Balance shaft LH bend 0.025 0.05 Replace
Mark Parts to be tightened Tightening torque Remarks
Bolt (idler shaft installation) 32.3 {3.3} –
Bolt (No. 1 idler shaft installation) 53.9 {5.5} –
Nut (balance shaft gear installation) 96.1 {9.8} Wet
Mark Points of application Specified lubricant and/or sealant Quantity
Inner surface of every bushing
Engine oil As required
Outside surface of every shaft
O-rings
Nut threads
Balance shaft journals
1 Thrust plate
2 Idler gear bushing
3 Idler gear
4 Idler shaft
5 Fan shaft case bushing
6 Fan shaft case
7 Thrust plate
8 Fan shaft
9 Fan gear shaft
10 Thrust plate
11 No. 1 idler gear bushing
12 No. 1 idler gear
13 No. 1 idler shaft
14 Oil pump (See Gr12.)
15 O-ring
16 Balance shaft gear RH
17 Thrust spacer
18 Key
19 Thrust plate
20 Balance shaft RH
21 Balance shaft gear LH
22 Thrust spacer
23 Key
24 Thrust plate
25 Balance shaft LH
* a : Crankshaft gear
*
b : Supply pump idler gear
: Locating pin
: Non-reusable parts