manualshive.com logo in svg

Mitsubishi Electric Melservo MR-J5 G Series, Руководство пользователя

Mitsubishi Electric Melservo MR-J5 G Series – мощный и надежный приводной узел, предназначенный для широкого спектра применений. Вы можете скачать бесплатно руководство пользователя на нашем сайте, чтобы узнать больше о возможностях этого устройства. Главное - желание узнать больше, всегда доступно на manualshive.com.

Поделиться
Скачать
background image

2  CONTROL MODE

2.1  Control mode [G] [WG]

45

2

-10

Dog type front end reference 
homing

Forward 
rotation

Performs homing with reference to the front end of the proximity dog in the 
direction of the front end.
Starting from the front end of the proximity dog, the position is shifted by the 
travel distance after the proximity dog and the home position shift distance. The 
position after the shifts is set as the home position.

-42

Reverse 
rotation

-11

Dogless Z-phase reference 
homing

Forward 
rotation

Performs homing with reference to the first Z-phase in the direction of the dog 
front end.
The position specified by the first Z-phase signal or the position of the first Z-
phase signal shifted by the home position shift distance is used as the home 
position.

-43

Reverse 
rotation

1 

*1

Homing on negative limit switch 
and index pulse

Reverse 
rotation

After the reverse rotation stroke end is detected, the position is shifted away 
from the stroke end in the reverse direction. Then, the position specified by the 
first Z-phase signal is used as the home position.
If the position is shifted in the forward rotation direction, and the forward rotation 
stroke end is detected before the Z-phase signal is detected, [AL. 090 Homing 
incomplete warning] will occur.

2 

*1

Homing on positive limit switch 
and index pulse

Forward 
rotation

After the forward rotation stroke end is detected, the position is shifted away 
from the stroke end in the reverse direction. Then, the position specified by the 
first Z-phase signal is used as the home position.
If the position is shifted in the reverse rotation direction, and the reverse rotation 
stroke end is detected before the Z-phase signal is detected, [AL. 090 Homing 
incomplete warning] will occur.

3

Homing on positive home switch 
and index pulse

Forward 
rotation

This is the same as the dog type last Z-phase reference homing.
If the stroke end is detected during homing, [AL. 090 Homing incomplete 
warning] will occur.

4

Homing on positive home switch 
and index pulse

Forward 
rotation

This is the same as the dog cradle type homing.
If the stroke end is detected during homing, [AL. 090 Homing incomplete 
warning] will occur.

5

Homing on negative home 
switch and index pulse

Reverse 
rotation

This is the same as the dog type last Z-phase reference homing.
If the stroke end is detected during homing, [AL. 090 Homing incomplete 
warning] will occur.

6

Homing on negative home 
switch and index pulse

Reverse 
rotation

This is the same as the dog cradle type homing.
If the stroke end is detected during homing, [AL. 090 Homing incomplete 
warning] will occur.

7

Homing on home switch and 
index pulse

Forward 
rotation

This is the same as the dog type last Z-phase reference homing.

8

Homing on home switch and 
index pulse

Forward 
rotation

This is the same as the dog cradle type homing.

11

Homing on home switch and 
index pulse

Reverse 
rotation

This is the same as the dog type last Z-phase reference homing.

12

Homing on home switch and 
index pulse

Reverse 
rotation

This is the same as the dog cradle type homing.

19

Homing without index pulse

Forward 
rotation

This is the same as the dog type front end reference homing.
If the stroke end is detected during homing, [AL. 090 Homing incomplete 
warning] will occur.

20

Homing without index pulse

Forward 
rotation

Although this type is the same as the dog cradle type homing, the stop position 
is not on the Z-phase. Starting from the front end of the dog, the position is 
shifted by the travel distance after proximity dog and the home position shift 
distance. The position after the shifts is set as the home position.
If the stroke end is detected during homing, [AL. 090 Homing incomplete 
warning] will occur.

21

Homing without index pulse

Reverse 
rotation

This is the same as the dog type front end reference homing.
If the stroke end is detected during homing, [AL. 090 Homing incomplete 
warning] will occur.

22

Homing without index pulse

Reverse 
rotation

Although this type is the same as the dog cradle type homing, the stop position 
is not on the Z-phase. Starting from the front end of the dog, the position is 
shifted by the travel distance after proximity dog and the home position shift 
distance. The position after the shifts is set as the home position.
If the stroke end is detected during homing, [AL. 090 Homing incomplete 
warning] will occur.

23

Homing without index pulse

Forward 
rotation

This is the same as the dog type front end reference homing.

Method No.

Homing methods

Rotation 
direction

Description

Содержание Melservo MR-J5 G Series



























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Melservo MR-J5 G Series

Jensen A1000 Owner'S Manual And Installation Instructions preview
A1000
Бренд: Jensen Страницы: 6
NAD 114 Datasheet preview
114
Бренд: NAD Страницы: 2
NAD 106 Specification Sheet preview
106
Бренд: NAD Страницы: 2
B&K 1606 Instructions And Applications preview
1606
Бренд: B&K Страницы: 24
QSC MX 1500a Brochure preview
MX 1500a
Бренд: QSC Страницы: 1
Electro-Voice CP-Series Power Amps CP1800 Owner'S Manual preview
CP-Series Power Amps CP1800
Бренд: Electro-Voice Страницы: 36
Factor X-7240-4 Owner'S Manual preview
X-7240-4
Бренд: Factor Страницы: 12
DaytonAudio DTA30HP User Manual preview
DTA30HP
Бренд: DaytonAudio Страницы: 4
DTC Audio CHAMP PC30D User Manual preview
CHAMP PC30D
Бренд: DTC Audio Страницы: 4
Rega Brio-R User Manual preview
Brio-R
Бренд: Rega Страницы: 17
Goldmund TELOS 153 User Manual preview
TELOS 153
Бренд: Goldmund Страницы: 14
Harris OPA 8500 Operating Manual preview
OPA 8500
Бренд: Harris Страницы: 9
Angry Audio Headphone Gizmo User Manual preview
Headphone Gizmo
Бренд: Angry Audio Страницы: 6
Perreaux SP100A Specification Sheet preview
SP100A
Бренд: Perreaux Страницы: 2
Mackie UP4061 Quick Start Manual preview
UP4061
Бренд: Mackie Страницы: 2
Crestron DM-NAX-8ZSA Product Manual preview
DM-NAX-8ZSA
Бренд: Crestron Страницы: 68
Kramer VP-2L User Manual preview
VP-2L
Бренд: Kramer Страницы: 12
Amperes MC2106 Instruction Manual preview
MC2106
Бренд: Amperes Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды