Metric Halo 3d Upgrade Board Set Скачать руководство пользователя

Страница: 265 / 527

The MIOConsole3d Application

265

• The ULN-8 offers settings for

Line +4

(10kΩ),

Line -10

(10kΩ),

Instrument

(200kΩ),

Mic

(3.3kΩ, 12kΩ

with +48v phantom engaged),

Ribbon

and the

Mic S/R

send/return loop.

‘Mic Send/Return’ physically routes the mic pre outputs to the ‘Balanced Send 1-8’ db25 connector

on the back panel of the ULN-8 for external analog processing before the a/d converters.

Mic Inputs

to preamps

External

processing

Mic S/R

Send

from preamps

Mic S/R

Return

to a/ds

Figure 10.110: ULN-8 ‘Mic S/R’ external process loop

This graphic shows the signal path for the Mic S/R external processing loop. Note that the ‘Balanced

Send 1-8’ mirrors whatever analog input you select in the Mixer Input strips, Mic, Line or any com-

bination thereof. This allows you to use the sends as a splitter to feed a mixing console, recorder

or other equipment.

• The LIO-8 offers

Line +4

(10kΩ),

Line -10

(10kΩ) and

Instrument

(200kΩ) settings. Any channels with

ULN-R mic pre-amp modules include all ULN-8 input options as listed above, including Mic S/R.

• The 2882 includes

Line +4

(10kΩ),

Line -10

(10kΩ),

Instrument

(200kΩ),

Mic

(200kΩ, 12kΩ with phan-

tom engaged) and

Mic/Pad

(10kΩ, 12kΩ with phantom engaged), for high-spl situations like con-

denser mics on kicks.

• The ULN-2 has no Headamp option here because it has a fully analog front end with all selection

and input gain/trim controls on its front panel.

“Polarity Invert”

is available on all Input strips regardless of source type.

Polarity Inversion is applied early in the signal path, before the Pre-Insert “To Host” routing

stage. For cases where Polarity invert at such and early stage is not desired, a “Polarity Invert”

plug-in is available for Input strip and Mixer Bus inversion insertion.

Содержание 3d Upgrade Board Set















































































































































































































































































































































































































































































































































Результаты поиска

Содержание 3d Upgrade Board Set

Отзывы:

Похожие инструкции для 3d Upgrade Board Set

Бренды по названию

Популярные бренды

Metric Halo 3d Upgrade Board Set, Руководство пользователя

Результаты поиска

Содержание 3d Upgrade Board Set

Отзывы:

Похожие инструкции для 3d Upgrade Board Set

Бренды по названию

Популярные бренды