Metric Halo 3d Upgrade Board Set Скачать руководство пользователя

Страница: 488 / 527

MIOConsole3d Ontology

488

Record Pause

• AKA: record standby

•

Short definition:

A temporary state in which Record is engaged, but the Recordhead is stationary.

Session “Pause” does not affect Play transport in any mode.

•

Details:

In Session, Transport “Pause” is a

record-mode-only

control which serves a specific purpose

for live or field location recording, where the goal is to record contiguous soundfiles across extended

periods of time, spanning hours or days with the possibility of extended breaks between recording

events. It is not designed for use in tracking or mixing.

Specifically, “Pause” is used to temporarily suspend recording while remaining in Record mode and

within the current Take. When you click “Pause” the Pause button turns blue, waveform drawing in

Tracks Overview stops and audio stops being written to your drives. The Record button will remain

red, confirming that you are still in Record mode, waiting to continue recording the current Take.

Record Enable

• AKA:

•

Short definition:

noun

: The control element on Mixer Strip and Track Header UIs which routes per-

insert audio from that strip to the recording engine, such that when recording is engaged, the audio

will be captured in realtime as an audio file.

•

Details:

It‘s that little button with the capital “R” located below the mixer strip level meter (and in

the Track header) that turns red to indicate “Record Enabled” state.

Engaging “Record Enable” anywhere in the MIOConsole 3d application immediately engages the

record engine Ring Buffer in preparation for capturing a “Take”.

Record Enable

• AKA: Record Arm, Track Arm

•

Short definition:

verb

: The act of egnaging (or arming) the "Record Enable" state.

•

Details:

Record Ready

• AKA: Record Armed, Track Armed

•

Short definition:

The state in which a strips‘ audio is routed to the record engine (e.g. Record Enabled)

but recording is not yet engaged.

•

Details:

Record Mode

• AKA: Recording (as a verb), Record engaged

•

Short definition:

The state in which the Record transport (i.e., the Recordhead) is running and the

record engine is actively capturing audio streams to audio files. Audio being recorded is drawn in

its Track as white waveforms on a bright red background, progressing forward from left-to-right on

the Session timeline.

•

Details:

Record Standby

• AKA:

•

Short definition:

The state in which Record Mode is engaged, but the Recordhead transport is await-

ing a level or timecode trigger, or an auto punch-in

Start

command to start the Recordhead moving

and fully engage active recording mode

•

Details:

“Record Standby” is indicated in the Transport Controls by a flashing red Record button.

Preroll

• AKA:

•

Short definition:

A record engine feature which inserts a set duration of audio at the head of each

audio file

before

the start of a Take.

•

Details:

Содержание 3d Upgrade Board Set















































































































































































































































































































































































































































































































































Результаты поиска

Содержание 3d Upgrade Board Set

Отзывы:

Похожие инструкции для 3d Upgrade Board Set

Бренды по названию

Популярные бренды

Metric Halo 3d Upgrade Board Set, Руководство пользователя

Результаты поиска

Содержание 3d Upgrade Board Set

Отзывы:

Похожие инструкции для 3d Upgrade Board Set

Бренды по названию

Популярные бренды