Metric Halo 3d Upgrade Board Set Скачать руководство пользователя

Страница: 485 / 527

MIOConsole3d Ontology

485

width, and the Session playback engine will do its best to accommodate. Stereo segments dragged

into a mono Track will be summed to mono, and stereo segments dragged to a 5.1 track will play

as channels L and R. Mono segments added to wider Tracks will send the audio to all the channels

of the strip.

Session UI conventions

Session in many ways approximates the functions of a typical digital audio workstation, in that Session can

record, edit and play audio files

Tracks Overview

• AKA:
•

Short definition:

A visual representation of Session Tracks and their audio segments

•

Details:

Within the Session window is a Track Overview for every track in the session. The track

overview shows the position, length and contents of the segments in each track. It provides a user

interface for you to move, trim, split, cut, copy and paste segments, as well as manipulate the seg-

ment metadata.

Tracks Overview: Mixer Input Strip

• AKA:
•

Short definition:

Tracks associated with Mixer Input Strips are the primary recording, playback and

editing tracks

•

Details:

Only Tracks associated with Mixer Input Strips are able to both record and play back audio

automatically, since only Input Strips include a hardware Source input route back to the Mixer.

Tracks Overview: Mixer Bus Strips

•

Short definition:

Bus Mixer Strips do have associated Tracks in the Tracks Overview primarily to main-

tain parity between Mixer Strip and Tracks layouts (critical for EuCon and MCP control surfaces op-

eration)

•

Details:

Tracks associated with Mixer Bus Strips may be recorded to, and may contain audio, but

since Bus Strips operate entirely within the Mixer engine with no connection to external Input routes,

there is no direct route for playback from the Session Track.

Tracks Overview: DCAs

• AKA:
•

Short definition:

Like Bus tracks, DCAs also have associated Tracks in the Tracks Overview to maintain

parity between Mixer Strip and Tracks layouts.

•

Details:

DCAs are control-only and can not record or play audio. DCA tracks may be used as a

temporary "holding tank" within the Session for audio segments to be stored and used later, without

fear of them accidentally interfering in the mix.

Track Headers

• AKA:
•

Short definition:

The control area for each Track, located at the left edge of the Session Tracks

Overview

•

Details:

The Track Header displays the name of its’ associated Mixer Strip, and provides remote

control of the Mixer from the Session window, including the color, solo, mute and record enable

buttons, panner (where applicable), and fader gain.

Содержание 3d Upgrade Board Set















































































































































































































































































































































































































































































































































Результаты поиска

Содержание 3d Upgrade Board Set

Отзывы:

Похожие инструкции для 3d Upgrade Board Set

Бренды по названию

Популярные бренды

Metric Halo 3d Upgrade Board Set, Руководство пользователя

Результаты поиска

Содержание 3d Upgrade Board Set

Отзывы:

Похожие инструкции для 3d Upgrade Board Set

Бренды по названию

Популярные бренды