Metric Halo 3d Upgrade Board Set, Руководство пользователя

Страница: 351 / 527

MIOConsole3d Session
351
$date$
pastes the current date to the file name. The ‘date’ format is year-month-day, so July 22,
2019 would be entered as “2019-7-22”
$tod$
pastes the Time Of Day at the start of the take into the file name. The ‘time’ format is hours-
minutes-seconds and uses a 24-hour time scale, so 1PM is represented as ‘13’ hours.
$todsamplenum$
will insert the number of audio samples counted from midnight to the start of the
recording into the file name. Again, this feature is mostly used when providing files to automated
media ingestion systems.
$timecode$
will insert the SMPTE timestamp at the start of the recorded file into the file name.
$tcsamplenum$
will insert the number of audio samples calculated from a linear time code reference.
(Note: if the LTC is locked to ‘Time Of Day’, this will be the same as
$todsamplenum$
).
$track$
: Each Track in the Session corresponds to a Mixer strip. The name of each strip being record-
ed is always visible in the track Overviews in the Session window.
$track$
pastes the name of the
track into the file name. In cases where the audio routed to the track is post-process (either ‘To Host:
Post-Insert’ or using the post-process Direct Out) the term
[POST]
will be added to the track name.
$tracknum[.n]$
: The Session Tracks Overview window shows each Mixer strip which has return routes
to the Host computer assigned. The position of these tracks corresponds to their position in the
Mixer: so strips at the left of the Mixer are shown as tracks at the top of the Session Overviews.
Using the Session Overviews as a map, the topmost track will be track 1, the one below it is track
2, and so on.
$tracknum[.n]$
numbers all tracks shown in the Session Overview, whether they are Record-Armed
or not. In cases where not all tracks are armed for any given take, the recorded track numbers will
have gaps in their sequence, but they will always match the same source audio and
$track$
name
from the Mixer.
$filenum[.n]$
is similar to
$tracknum[.n]$
, but counts only the files actually being recorded.
Note: Plain text inserted in the ‘Template’ fields (outside of the token variables) will be applied to
the foldername or filename as entered.
Spaces are allowed in folder and filenames, but keep in mind that some internet transmission sys-
tems, media ingestion systems and computer file systems have different opinions of how to handle
spaces and uncommon characters. It is a good habit to use underscores ( _ ) or hyphens ( - ) instead
of spaces to head off any file-reading issues down the road.