Metric Halo 3d Upgrade Board Set Скачать руководство пользователя

Страница: 423 / 527

The DSP Toolchest

423

Plug-in version

Delay (samples)

Delay (ms)

7165

162.517

8192

185.737

9216

208.957

10k

10240

232.177

15k

15360

348.277

Table 16.2. External memory delay times

MIO MultiTap Delay

• Synopsis: MultiTap Delay

• Category: Delay, Building Blocks

• Channels: 1

Description:

MIO MultiTap Delay implements a multi-tapped delay line. The total delay line length in this im-

plementation varies; see the table below. Each delay tap is independent from the other taps, and

provides controls to set the tap delay, gain level and polartity invert. Each tap can be enabled and

disabled independently as well.

The delayed signal for each tap is available on dedicated outputs for further processing. The con-

tributions of each tap are also summed together and the summed signal is available on the last

output of the processing block.

The MIO MultiTap Delay is appropriate for creating the initial delays for a reverb algorithm. It can

also be used to create multiple delayed copies of a signal. This second application can be used in

a musical context or could be used to create multiple time-aligned feeds for a distributed sound

reproduction system (e.g. a PA with multiple fill zones).

Parameters:

Enable

{Off, On}

Enable the tap. When enabled, the tap generates output from on its dedicated output port

and contributes to the summed output.

Delay(samp)

[0, 1.023k] samps

Sets the delay, in samples, between the input and output of this tap.

Gain

[-160, 10] dB

Sets the gain of the delayed signal.

Invert

{Off, On}

When enabled, inverts the delayed signal relative to the input polarity.

Enable

{Off, On}

Enable the tap. When enabled, the tap generates output from on its dedicated output port

and contributes to the summed output.

Содержание 3d Upgrade Board Set















































































































































































































































































































































































































































































































































Результаты поиска

Содержание 3d Upgrade Board Set

Отзывы:

Похожие инструкции для 3d Upgrade Board Set

Бренды по названию

Популярные бренды

Metric Halo 3d Upgrade Board Set, Руководство пользователя

Результаты поиска

Содержание 3d Upgrade Board Set

Отзывы:

Похожие инструкции для 3d Upgrade Board Set

Бренды по названию

Популярные бренды