Metric Halo 3d Upgrade Board Set Скачать руководство пользователя

Страница: 251 / 527

The MIOConsole3d Application

251

• Input strip Fader: pre-fader

• Visibility: on-strip

• Monitor Control: In MC

• Group buses: 0

• DCAs: 0

• Mute Groups: 0

• One stereo “Host“ Input strip: unmuted, input routed from Host computer channels 1/2, assigned

to Main mix bus

• One mono Input strip per analog input: Input head amp set to ‘Line +4’ at unity gain, includes

Pre-Insert “To Host“ returns, is assigned to the Main mix bus, is panned to center, and is muted

for safety at the Fader stage.

• ‘Selected Strips’ Link Group: enabled,

Rel

ative behavior

• ‘Mixer Strips Width’: Normal

• ‘Mixer UI Scale’: 100%

•

Monitor Controller:

• Monitor Controller is visible, not floating

• Monitor Controller Sources: Main (default) and stereo Aux mixes 1 through 4

• Monitor Controller Graph: passthrough

• Monitor Controller Output: stereo, assigned to box #1 analog output channels 1/2, Monitor mode

(LIO and ULN-8 only), Trims and Delays at 0

• Monitor Controller Slaves to PFL/AFL: ON

Figure 10.92: Menu bar “Monitor” menu: “Monitor Controller Slaves to PFL/AFL” control

People who spend most of their time in DAWs working in ‘Solo-In-Place’ mode should take note

of this feature. This setting is found in the ‘Monitor’ menu bar pull-down.

When the Mixer is in one of the PFL/AFL modes, this setting makes the Monitor Controller play

back the ‘Solo’ bus whenever Solo is engaged. This is the most common default mode for PFL/

AFL use on a hardware console.

De-selecting this control leaves the MC Source uninterrupted when Solo is engaged.

This function is also available separately for each of the Cue Controller sends, so you could have,

say, a Cue send to headphones slaved to the PFL/AFL Solo bus, while not interrupting the control

room ‘Main’ bus mix for a producer.

Содержание 3d Upgrade Board Set















































































































































































































































































































































































































































































































































Результаты поиска

Содержание 3d Upgrade Board Set

Отзывы:

Похожие инструкции для 3d Upgrade Board Set

Бренды по названию

Популярные бренды

Metric Halo 3d Upgrade Board Set, Руководство пользователя

Результаты поиска

Содержание 3d Upgrade Board Set

Отзывы:

Похожие инструкции для 3d Upgrade Board Set

Бренды по названию

Популярные бренды