Metric Halo 3d Upgrade Board Set, Руководство пользователя

Страница: 416 / 527

The DSP Toolchest
416
Comp Sidechain EQ Bandwidth
[0.01, 2.5] Oct
Sets the bandwidth of the filter band in octaves.
Comp Sidechain EQ Type
{Peaking/Parametric, Low Shelf, Hi Shelf, Hi Cut, Low Cut, Band
Pass, RIAA}
Chooses the type of filter that is applied for the band.
EQ Enable
{Off, On}
Enables the EQ block. When disabled, the EQ is hard-bypassed, and does not consume DSP
power.
EQ Gain
[-80, 10] dB
Master gain applied to the signal at the output of the EQ block. Since the EQ is implemented
as a high-resolution floating point process, you can bring the output signal of the EQ out of
any degree of clipping using this parameter.
EQ Band Enable
{Off, On}
Enables the band. When disabled, the band is hard-bypassed.
EQ Band Gain
[-24, 24] dB
Sets the parametric gain on the EQ band. For peaking filters, this is the gain at the peak of
the band. For shelving filters, this is the gain at the extreme limit of the filter. This parameter
is ignored for the high and low pass filter types as well as the bandpass filter type.
EQ Band Frequency
[20, 22k] Hz
Sets the characteristic frequency of the filter band.
EQ Band Bandwidth
[0.01, 2.5] Oct
Sets the bandwidth of the filter band in octaves.
EQ Band Type
{Peaking/Parametric, Low Shelf, Hi Shelf, Hi Cut, Low Cut, Band Pass, RIAA}
Chooses the type of filter that is applied for the band.
Master Bypass
{On, Off}
When enabled, hard-bypasses the entire plug-in, and substantially reduces the amount of DSP
power used.
MIO Channel Summer
• Synopsis: Channel Summer
• Category: Building Blocks
• Channels: 2
Description:
Summer takes its inputs and forms the sum (A+B) of the two signals.