Metric Halo 3d Upgrade Board Set Скачать руководство пользователя

Страница: 119 / 527

ULN-8 Users Guide

119

There are eight classes of connections you can make to the ULN-8 3d hardware:

1. Gigabit Ethernet (MHLink)

2. USB

3. Analog Audio

4. AES Digital Audio

5. Clock Sync

6. MIDI

7. SMPTE

8. Power

Computer Connections

•

MHLink (Gigabit Ethernet)

- The preferred method of connecting your computer to the ULN-8 (or

any Mobile I/O 3d audio device) is with a Gigabit Ethernet cable to one of the MHLink ports. This

method enables the full capabilities of the 3d/MHLink environment with 128 channels at 32bit inte-

ger resolution input and output at all sample rates up to 192kHz. Daisy-chaining additional MHLink

boxes dynamically and transparently integrates the new devices into the currently-running 3dCon-

sole mixer, making all the added I/O ports and DSP engine power immediately available for use.

MHLink requires the installation of the MHLinkDriver software. The latest MIOConsole3d installer

package is available from:

macOS MIOConsole3d installers

(this will require a restart). Please see

the section on

software installation

if you need clarification.

Driver Installation on macOS 10.13 and newer

With High Sierra (macOS 10.13) Apple introduced another layer of driver (system exten-

sion) software security.

In order for third-party drivers (system extensions) to be activated on new installs of High

Sierra, the user of the computer (you) must explicitly approve the activation, after the

installation has occurred.

You must do this before you will be able to use your hardware via MHLink.

The authorization process is the same for all third-party drivers. If you are unfamiliar with

the process, please read our FAQ answer here:

macOS Driver User Authentication

Note:

With MHLink, you need to launch MIOConsole3d to establish the routing between MHLink and

the attached box(es). The routing is established automatically as soon as you launch MIOConsole3d.

•

USB

- The secondary method of connecting to your ULN-8 is with USB. USB connections for audio

transport will be limited compared to MHLink. In a pinch, however, your ULN-8 can be seen as an

audio device by any computer with a UAC2 class-compliant USB port.

Please note:

Connection to any 3d unit by both USB and Ethernet is not currently supported. Future

updates to the driver and 3d platform may explore scenarios which allow dual-port connections.

Analog Audio Connections

The analog I/O connections on the ULN-8 have been engineered for maximum flexibility in that they sup-

port both balanced and unbalanced connections with a wide range of input and output levels and a wide

Содержание 3d Upgrade Board Set















































































































































































































































































































































































































































































































































Результаты поиска

Содержание 3d Upgrade Board Set

Отзывы:

Похожие инструкции для 3d Upgrade Board Set

Бренды по названию

Популярные бренды

Metric Halo 3d Upgrade Board Set, Руководство пользователя

Результаты поиска

Содержание 3d Upgrade Board Set

Отзывы:

Похожие инструкции для 3d Upgrade Board Set

Бренды по названию

Популярные бренды