Metric Halo 3d Upgrade Board Set Скачать руководство пользователя

Страница: 48 / 527

LIO-8 Quick Start Guide

Analog 2

AES 1-8

Analog 1

Send 1-8

(Mirrors selected

Mic/Line input)

Green:

Red:

Blue:

Line 1

Analog (Line) 1-8

Analog 1-8

Cans L/R

Line 2

Routable Inputs

Routable Outputs

Non-routable connections

Figure 2.2: LIO-8 Routing

Connect the LIO-8

Install the latest MIOConsole3d installer package from:

macOS MIOConsole3d installers

(this will require

a restart). Please see the section on

software installation

if you need clarification.

Driver Installation on macOS 10.13 and newer

With High Sierra (macOS 10.13) Apple introduced another layer of driver (system extension)

software security.

In order for third-party drivers (system extensions) to be activated on new installs of High Sierra,

the user of the computer (you) must explicitly approve the activation, after the installation has

occurred.

You must do this before you will be able to use your hardware via MHLink.

The authorization process is the same for all third-party drivers. If you are unfamiliar with the

process, please read our FAQ answer here:

macOS Driver User Authentication

Additionally, with macOS 10.14 and 10.15, you must select “Yes” when asked to give

MIOConsole3d permission to access the “Microphone”. If in doubt, double-check this setting:

go to the Apple menu: System Preferences.../Security & Privacy pane, select “Microphone” in

the column to the left, and make sure that MIOConsole3d is checked.

Connect an ethernet cable between the LIO-8 and an available ethernet port on your computer, then go

to the System Preferences and select “MHLink Audio” as the system’s sound input and output.

Get familiar with the front panel

Look at the LED under the Monitor Control encoder; the “Monitor Control” LED should be illuminated. If

“Cans” is lit, push the encoder to switch it (all encoders have shaft buttons). The LED should be green; if

Содержание 3d Upgrade Board Set















































































































































































































































































































































































































































































































































Результаты поиска

Содержание 3d Upgrade Board Set

Отзывы:

Похожие инструкции для 3d Upgrade Board Set

Бренды по названию

Популярные бренды

Metric Halo 3d Upgrade Board Set, Руководство пользователя

Результаты поиска

Содержание 3d Upgrade Board Set

Отзывы:

Похожие инструкции для 3d Upgrade Board Set

Бренды по названию

Популярные бренды