Metric Halo 3d Upgrade Board Set Скачать руководство пользователя

Страница: 318 / 527

MIOConsole3d Session

318

• Split and Remove (splits and removes existing segments on overlap, adds new segment)

• Split and Mute (splits and mutes existing segments on overlap, adds new segment)

• Add (adds new segment)

• Auto-edits support user selectable cross fade times

• Multiple Segments can be selected

• Time regions can be selected

• Segments can be split, topped, and tailed at the playhead or selection

• Segments can be split or trimmed to the loop points or selection

• Segments can be named

• Segments can be moved or copied

• Segments can be snapped to the grid

• Segments can be removed

• Selections can be cut or copied to the clipboard

• The clipboard can be pasted at the playhead or selection point

• Media file for Segment can be replaced

• Audio files can be revealed in the Finder from the Segment

• Import/Export

• Segments can be exported as new audio files (with trimming, gain and fades applied)

• Individual tracks can be exported as new audio files

• Individual tracks can be exported as new audio files, trimmed to loop points

• All tracks can be exported as new audio files

• All tracks can be exported as new audio files, trimmed to loop points

• The Selected area of the Session can be exported as new audio files

• Folders of existing audio files can be imported into new tracks

• Folders of takes can be imported into new tracks, with takes loaded successively on new tracks

• Audio files can be dragged directly into tracks in the

Session

window

• Multiple Audio files can be dragged and dropped onto successive tracks

• File management

•

Session

detects when media files are not found

• All playlist information is maintained

• Intelligent multi-file find tool to locate missing files

• Supports finding files that have been renamed or moved

• Found files are immediately reattached to playlist

• Recording

• Record-enabled tracks record to record folders (with mirroring)

• User specified file and take folder naming rules

• Take number management

• Tracks are recorded to files with natural width

• Mono tracks record to mono files

• Stereo tracks record to stereo files

• 5.1 tracks record to 5.1 files

• etc.

• Session always records pre-insert, and plays back through inserts

• It is possible to record onto bus tracks

• Bus tracks do not play back

• If you want to play back a bus track, you need to move the file to an input track

• Mixer now supports “tape” returns and is transport-state aware

• When transport is stopped, mixer monitors inputs

• When transport is in Play

• For tracks with Segments

• Not record enabled

• Mixer monitors tape returns

• Record Enabled

• Mixer monitors mix of input + tape returns

Содержание 3d Upgrade Board Set















































































































































































































































































































































































































































































































































Результаты поиска

Содержание 3d Upgrade Board Set

Отзывы:

Похожие инструкции для 3d Upgrade Board Set

Бренды по названию

Популярные бренды

Metric Halo 3d Upgrade Board Set, Руководство пользователя

Результаты поиска

Содержание 3d Upgrade Board Set

Отзывы:

Похожие инструкции для 3d Upgrade Board Set

Бренды по названию

Популярные бренды