*
NOTE Damage to the cup holder from the
rear seat
Folding the rear seat in the third row of seats
forwards can damage the cup holder.
#
Remove the cup holder before folding the
seat.
Folding the seat backrest forwards (table position)
#
Fold up the armrests (
/
page 75).
#
Pull release handle
1
for the seat backrest
upwards and fold the seat backrest forwards.
Folding the rear seat forwards
%
Pictogram
4
on the seat reminds you not to
travel sitting behind a seat that has been fol-
ded forwards.
#
Slide the folding table to its rearmost position
(
/
page 97).
#
Remove the head restraint (
/
page 92).
#
Fold the seat backrest forwards into the table
position.
#
Pull release handle
3
upwards.
#
Grasp the seat by grab handle
2
and fold the
seat forwards.
#
To fold back the rear seat: using grab handle
2
, pull the seat backwards forcefully.
The rear seat legs will engage.
The rear seat legs of the rear bench seat are cor-
rectly engaged when the seat legs engage audibly
and indicator tabs
5
on the seat legs are no lon-
ger visible and have fully retracted into the seat
legs.
▌
Installing and removing the rear seat
&
WARNING Risk of accident and injury as a
result of rear bench seat not being
engaged
If the rear bench seat is not engaged, it may be
flung around during travel.
#
Always make sure that the rear bench
seat is engaged as described.
In order to ensure that the rear bench seat can
securely engage, keep the seat guide rails and
anchorages in the vehicle floor free of dirt and for-
eign objects.
If the indicator tab of the seat anchorage is not
retracted into the seat leg, the seat is not correctly
engaged. Engage the seat again.
&
WARNING Risk of injury‑ or fatal injury
when the last row of seats is rotated
180 °
The vehicle occupants in the rear seats can be
injured by unsecured loads.
This poses an increased risk of injury or even
fatal injury.
#
If loads are being transported, never
install the rear seats in the last row of
seats rotated by 180 °.
#
Always store and secure objects and
loads properly in the vehicle.
&
WARNING Risk of becoming trapped when
adjusting the seats
When you adjust a seat, you may trap yourself
or a vehicle occupant.
#
When adjusting a seat, make sure that no
one has any body parts in the sweep of
the seat.
Removing
When installing and removing the rear seats with
seat heating and seat ventilation or the luxury rear
seats, note the routing of the cables and their orig-
inal installation positions. Otherwise, you may
damage the cables and the on-board computer
may detect the seat position incorrectly.
Use only rear seats with seat heating and seat ven-
tilation or luxury rear seats that were supplied with
the vehicle. Due to the high-quality design and the
84
Seats and stowage
T447 0414 02
Содержание EQV 2021
Страница 1: ...EQV Owner s Manual T447 0414 02 ...
Страница 7: ...T447 0414 02 ...