Mercedes-Benz EQV 2021, Руководство пользователя

Страница: 235 / 300

Fitting
#
Press the arrow on cover 1 and remove cover
1
from the opening.
You will see the fixture for the towing eye.
#
Screw in the towing eye clockwise to the stop.
#
Insert the screwdriver into the towing eye and
tighten the towing eye.
#
Stow the screwdriver in the vehicle tool kit.
Removing
#
Remove the screwdriver from the vehicle tool
kit.
#
Insert the screwdriver into the towing eye and
turn the towing eye anti-clockwise.
#
Unscrew and remove the towing eye.
#
Insert cover 1 with the lug at the top and
press it in at the bottom until it engages.
#
Stow the towing eye and the screwdriver with
the vehicle tool kit.
Rear towing eye
Rear towing eye under the bumper
#
When towing away or tow-starting a vehicle,
attach the towing device to rear towing eye
2 .
#
Observe the notes on permissible towing meth-
ods (
/
page 229).
Tow-starting the vehicle (vehicle emergency start)
#
If the vehicle does not start, have the vehicle
transported to the nearest qualified specialist
workshop, e.g. a Mercedes-Benz Service
Centre.
#
The vehicle cannot be started by tow-starting.
Do not attempt to tow-start the vehicle.
Electrical fuses
Notes on electrical fuses
&
WARNING Risk of accident and injury due
to overloaded lines
If you manipulate or bridge a faulty fuse or if
you replace it with a fuse with a higher amper-
age, the electric line could be overloaded.
This could result in a fire.
#
Always replace faulty fuses with specified
new fuses containing the correct amper-
age.
If the new fuse which has been inserted also
blows, have the cause traced and rectified at a
qualified specialist workshop.
The fuse allocation chart and the information on
the fuses can be found in the "Fuse allocation
chart" Supplement.
Vehicle tool kit
Information on the vehicle tool kit
The vehicle tool kit is in the rear stowage compart-
ment.
Apart from some country-specific variants, vehi-
cles without a spare wheel are not equipped with a
tyre-changing tool.
If your vehicle is equipped with a tyre-change tool
kit, you can find it in the vehicle tool kit in the rear
stowage compartment.
Some tools for changing a wheel are specific to
the vehicle. For more information on which tyre-
change tool kits are required and approved for per-
forming a wheel change on your vehicle, consult a
qualified specialist workshop.
Required tyre-change tool kits may include the fol-
lowing, for example:
R
Jack
R
Wheel spanner
R
Ratchet ring spanner
%
The jack has a maximum weight of 7.5 kg
depending on the vehicle's equipment.
You will find the maximum load capacity of the
jack stated on the adhesive label attached to
the jack.
Breakdown assistance 233
T447 0414 02