Certain types of sunlight (e.g. sun low on the hori-
zon) or light from another intense light source can
reduce the display's contrast and cause it to
become too bright. In such situations, objects in
the display may be obscured or difficult to see. In
these cases be particularly careful and adapt your
driving style accordingly.
Drivers must always wear the necessary personal
visual aids required for them to drive a vehicle.
Drivers with presbyopia (age-related long-sighted-
ness) should, if necessary, wear visual aids with
multifocal lenses to be sufficiently able to see traf-
fic including via the displays.
%
If the camera in the rear window is dirty, oper-
ate the rear window wiper with washer fluid
(
/
page 115) or clean the rear window man-
ually. Observe the notes on cleaning the digital
rearview mirror (
/
page 222).
#
To use the standard rearview mirror: move the
switch to position
1
.
#
To use the display: move the switch to position
2
.
Adjusting the display brightness
%
The digital rearview mirror is equipped with
light sensors on the front and back and auto-
matically adjusts the brightness of the display
to the lighting conditions. Do not cover the
light sensors, e.g. with a sticker.
#
Press menu button
3
once.
#
Press button
4
to reduce the display bright-
ness.
or
#
Press button
5
to increase the display bright-
ness.
Adjusting the angle of the camera
#
Press menu button
3
twice.
#
Press button
4
to move the angle down-
wards.
or
#
Press button
5
to move the angle upwards.
Error mode of the digital rearview mirror
If a system error occurs, e.g. if the camera fails, a
crossed-out camera will appear at the top left of
the display and no camera image will be visible in
the mirror.
#
Switch to the standard rearview mirror if there
is a system error.
Automatic anti-dazzle mirrors function
&
WARNING Risk of acid burns and poison-
ing due to the anti-dazzle mirror electro-
lyte
Electrolyte may escape if the glass in an auto-
matic anti-dazzle mirror breaks.
The electrolyte is hazardous to health and cau-
ses irritation. It must not come into contact
with your skin, eyes, respiratory organs or
clothing or be swallowed.
#
If you come into contact with electrolyte,
observe the following:
R
Immediately rinse the electrolyte
from your skin with water and seek
medical attention.
R
If electrolyte comes into contact with
your eyes, immediately rinse them
thoroughly with clean water and seek
medical attention.
R
If the electrolyte is swallowed, imme-
diately rinse your mouth out thor-
oughly. Do not induce vomiting. Seek
medical attention immediately.
R
Immediately change out of clothing
which has been contaminated with
electrolyte.
R
If an allergic reaction occurs, seek
medical attention immediately.
The inside rearview mirror and the outside mirror
on the driver's side will automatically go into anti-
dazzle mode if light from a headlamp hits the sen-
sor on the inside rearview mirror.
System limits
The system will not go into anti-dazzle mode if:
R
the vehicle is switched off
R
reverse gear is engaged.
R
the interior lighting is switched on.
R
the incident light from the headlamps is
blocked by objects in the load compartment,
118 Light and vision
T447 0414 02
Содержание EQV 2021
Страница 1: ...EQV Owner s Manual T447 0414 02 ...
Страница 7: ...T447 0414 02 ...