Status of
charging proc-
ess
3
Display
Meaning
#
Lights up
green
Charging
process com-
pleted
#
Flashes red
(for approx.
90 s)
Malfunction
when charg-
ing
Notes on charging the high-voltage battery at the
mains socket (mode 2)
&
DANGER Risk of fatal injury from incor-
rectly installed component parts
Connecting the charging cable to a mains
socket using incorrectly installed component
parts could cause a fire or an electric shock,
for example.
#
Only connect the charging cable to a
mains socket that:
R
Has been properly installed and
R
Has been inspected by a qualified electri-
cian
#
For safety reasons, only use the charging
cable supplied with the vehicle or an
original Mercedes-Benz charging cable.
#
Purchase these parts at a Mercedes-
Benz Service Centre and obtain advice
there.
Mercedes-Benz thoroughly tests these original
charging cables for their suitability for high-
voltage charging of your vehicle.
#
Never use a damaged charging cable.
#
Do not use:
R
Extension cables
R
Extension reels
R
Multiple sockets
#
Never use socket adapters to connect
the charging cable to the mains socket.
The only exception being if the adapter
has been tested and approved by the
manufacturer for charging the high-volt-
age battery of an electric vehicle.
#
Observe the safety notes in the operating
instructions for the socket adapter.
*
NOTE Overloading the mains socket due to
excessive charging current
If the charging current is too high, the fuse
could be tripped or the external mains supply
could overheat.
#
Make sure that the external mains supply
has been designed to handle the set
charging current.
#
If necessary, reduce the set charging cur-
rent or use a different mains socket.
#
For safety reasons, only use the charging
cable supplied with the vehicle or an
original Mercedes-Benz charging cable.
Mercedes-Benz thoroughly tests these
original charging cables for their suitabil-
ity for high-voltage charging of your vehi-
cle. Purchase these parts at a Mercedes-
Benz Service Centre and obtain advice
there.
#
Check the setting of the maximum
charge current using the charging capa-
city shown in the display of the instru-
ment cluster.
Before charging at a mains outlet, have the maxi-
mum permissible charging current for the relevant
mains outlet or the building inspected by a quali-
fied electrician.
The charging cable can be set to a country-specific
maximum charging current value. When charging
abroad, the maximum value may exceed the per-
mitted value for that country.
When abroad, observe the country-specific laws
when charging.
Only charging cables which fulfil the local grid
requirements of your location and are approved for
your vehicle may be used.
If you have questions concerning charging cables
or if there is a malfunction, please contact a quali-
fied specialist workshop.
You can set the maximum permissible charging
current in the on-board computer (
/
page 139).
The charging process can vary depending on the
power supply equipment.
%
If the vehicle requires more time than usual to
charge the high-voltage battery, check the
maximum charging current settings in the on-
board computer.
Driving and parking 141
T447 0414 02
Содержание EQV 2021
Страница 1: ...EQV Owner s Manual T447 0414 02 ...
Страница 7: ...T447 0414 02 ...