Mercedes-Benz EQV 2021, Руководство пользователя

Страница: 215 / 300

Fitting the luggage compartment partition
If possible, fit luggage compartment partition 1
with the help of another person.
#
Place luggage compartment partition 1 into
the vehicle at an angle.
#
Rotate luggage compartment partition 1 in
the vehicle and insert it into the guide rails.
The guide rails have triangular markings at the
place to be inserted which must be at the same
height as levers
2
.
#
Swing levers 2 outwards.
Luggage compartment partition 1 is locked.
#
Fold luggage compartment partition 1 down.
Carrier systems
Notes on carrier systems
&
WARNING Risk of accident due to exceed-
ing the maximum roof load
The vehicle centre of gravity and the usual driv-
ing characteristics as well as the steering and
braking characteristics alter.
If you exceed the maximum roof load, the driv-
ing characteristics, as well as steering and
braking, will be greatly impaired.
#
Never exceed the maximum roof load
and adjust your driving style.
You can find information on the maximum roof
load under "Lashing points and carrier systems"
(
/
page 252).
*
NOTE Damage due to exceeding the maxi-
mum permissible roof load
If the weight of the roof luggage, including the
roof luggage rack, exceeds the maximum per-
missible roof load, this can cause damage to
the vehicle.
#
Do not exceed the maximum permissible
roof load.
#
Arrange the supporting feet of the roof
luggage rack at an even distance from
each other.
#
Install the basic carrier bars for rail in
front of and behind the mid-section sup-
port.
*
NOTE Damage to the threaded holes of
the roof luggage rack due to an exces-
sively high tightening torque
An excessively high tightening torque or an
insufficient screw-in depth can cause damage
to the thread of the roof luggage rack's threa-
ded holes.
#
Tighten the screws to a maximum torque
of 10 Nm.
#
Comply with the minimum screw pene-
tration of four revolutions in the thread.
#
To avoid damage to the vehicle, use roof
and rear luggage racks that have been
tested and approved for Mercedes-Benz.
*
NOTE Damage to the vehicle due to not
observing the maximum permitted head-
room clearance
If the vehicle height is greater than the maxi-
mum permitted headroom clearance, the roof
and other parts of the vehicle may be dam-
aged.
#
Observe the signposted headroom clear-
ance.
#
If the vehicle height is greater than the
permitted headroom clearance, do not
enter.
#
Observe the changed vehicle height with
add-on roof equipment.
You can install a roof luggage rack on the roof and,
for example, a rear bicycle rack on the tailgate.
Install the cover caps of the securing thread after
removing the roof luggage rack.
Transporting 213
T447 0414 02