tie-down eye from being released unintention-
ally, e.g. if the tie-down eye is stepped on.
#
Check that tie-down eye
2
is seated cor-
rectly.
The tie-down eye cannot be moved.
Removing
#
Turn metal retaining ring
3
so that it is paral-
lel to the long axis of tie-down eye
2
.
#
Grip tie-down eye
2
as described above
under fitting and use your thumb to push the
locking pin down as far as it will go.
#
Slide tie-down eye
2
and pull it up and out
through the notch of guide rail
1
.
Load securing aid
Removing or fitting a load protection net
&
WARNING Risk of injury or death due to
objects being poorly secured
The load protection net alone cannot restrain
or secure heavy objects, luggage or heavy
loads.
You could be hit by an unsecured load during
sudden changes in direction, braking or in the
event of an accident.
#
Always stow objects in such a way that
they cannot be thrown about the vehicle.
#
Secure objects, luggage or loads against
slipping or tipping over, e.g. by using
lashing material, even when you are
using the load protection net.
&
WARNING Risk of injury due to sitting
behind a load protection net
Vehicle occupants can be pressed against the
load protection net. There is a risk of injury!
#
Never allow vehicle occupants to sit
behind the load protection net.
The load protection net partitions the load com-
partment. It protects vehicle occupants from light
objects and/or luggage slipping or tipping over.
You can install the load protection net at an angle
behind the front seats or behind the first row of
rear seats.
#
Observe the notes on securing loads
(
/
page 208).
Upper retainer
Floor anchorage (example: secured tie-down eye)
Fitting
#
Remove the luggage compartment partition if
necessary (
/
page 211).
#
Clip the load protection net into upper retain-
ers
1
in such a way that tensioning straps
3
face the rear of the vehicle.
#
Fit tie-down eyes
5
into the guide rails close
to the rear seat legs (
/
page 209). Position
them at least 5 cm from the seat legs to allow
subsequent movement of the rear seat.
#
Check that tie-down eyes
5
are seated cor-
rectly.
Tie-down eyes
5
should not move.
#
Clip hooks
4
on tensioning straps
3
into tie-
down eyes
5
.
#
Fold tensioning element
2
up.
210 Transporting
T447 0414 02
Содержание EQV 2021
Страница 1: ...EQV Owner s Manual T447 0414 02 ...
Страница 7: ...T447 0414 02 ...