Mercedes-Benz EQV 2021, Руководство пользователя

Страница: 46 / 300

Size class: Equipment: Rear seat / rear bench seat
X Not suitable for an ISOFIX child restraint system in this weight group and/or size class.
IL Suitable for ISOFIX child restraint systems according to the table in "Overview of the recommended child restraint systems", or if the vehicle and
the seat are listed on the child restraint system manufacturer's vehicle model list.
IUF Suitable for forward-facing ISOFIX child restraint systems of the "Universal" category in this weight group.
1 Only on the first rear seat row on a rear bench seat
2 The seat must be installed in the direction of travel.
3 It is permissible to use a seat on the second rear seat row only if the maximum distance between the two rear seat rows is set. To this end, the
seat on the second rear seat row must be fitted in the rearmost position allowed and the seat on the first rear seat row in front of it must be fitted
in the foremost position allowed. If you use the centre seat on the second rear seat row, all seats on the first rear seat row must be fitted in the
foremost position allowed.
4 If you are using a child restraint system in size class C (ISO/R3), make sure that the seat backrest of the front seat is not in contact with the child
restraint system. If possible, move the front seat to the highest position and the seat backrest to the upright position.
▌ Fitting an ISOFIX child restraint system on the
rear seat
&
WARNING Risk of injury or death if the
permissible gross mass of the child and
child restraint system together is excee-
ded.
Too much load may be placed on the ISOFIX
child restraint system and the child may not be
restrained correctly in the event of an acci-
dent, for example.
#
If the child and the child restraint system
together weigh more than the permissi-
ble gross mass of 33 kg , only use an
ISOFIX child restraint system with which
the child is secured with the vehicle seat
belt.
#
Also secure the child restraint system
with the Top Tether belt, if available.
Always comply with the information about the
mass of the child restraint system:
R
in the manufacturer's installation and operat-
ing instructions for the child restraint system
used
R
on a label on the child restraint system, if avail-
able
Check regularly that the permissible gross mass of
the child plus the child restraint system is not
exceeded.
When you install a child restraint system, observe
the following:
O
Always observe the correct use and suitability
of the seats for attaching a child restraint sys-
tem.
ISOFIX child seat anchor (
/
page 43)
O
Always observe the manufacturer's installa-
tion and operating instructions for the child
restraint system used.
O
Make sure that the child's feet do not touch
the front seat. If necessary, move the front
seat slightly forwards.
® When fitting an ISOFIX child restraint system,
also observe the following:
O
When using a Group 0/0+ baby car seat and
a Group 1 rearward-facing child restraint sys-
tem on a rear seat: adjust the front seat so
that the seat does not touch the child
restraint system.
O
Move the rear seat backrest to an upright
position before you fit the child seat. Do not
adjust the seat backrest when an ISOFIX child
restraint system is fitted.
O
For certain child restraint systems in weight
group 2 or 3, there may be restrictions on the
maximum size setting, e.g. due to possible
contact with the roof.
O
Do not put the child restraint system under
strain between the roof and the sitting surface
and/or fit it facing the wrong direction.
44
Occupant safety
T447 0414 02