Mercedes-Benz EQV 2021, Руководство пользователя

Страница: 93 / 300

After use, finish by moving the seat/bunk combi-
nation back to the basic setting and ensure that
the seat backrest is in an upright position.
Moving the seat sliders
When you remove the seat/bunk combination, a
rear bench seat or a seat, the seat slider may slide
in a guide rail. The seat sliders will then no longer
be parallel in the guide rails. In this case, you will
no longer be able to fit the respective seating. The
seat sliders must be moved using only the handle
for seat sliders 1 or at a qualified specialist work-
shop in order to prevent the risk of damage.
In addition, you can use the end of the handle to
open and close the locks on the sliders.
%
Handle 1 is in the stowage compartment of
the seat/bunk combination ( / page 97).
#
Place the tip of handle
1
onto the middle bolt
of three bolts 4 .
#
Swing handle 1 downwards onto seat slider
2
.
#
Press seat slider 2 into guide rail 3 with
handle 1 .
Seat slider 2 will be unlocked.
#
Move seat slider 2 into the correct position
and engage it.
▌ Installing and removing the seat/bunk combina-
tion
&
WARNING Risk of accident and injury as a
result of rear bench seat not being
engaged
If the rear bench seat is not engaged, it may be
flung around during travel.
#
Always make sure that the rear bench
seat is engaged as described.
In order to ensure that the rear bench seat can
securely engage, keep the seat guide rails and
anchorages in the vehicle floor free of dirt and for-
eign objects.
If the indicator tab of the seat anchorage is not
retracted into the seat leg, the seat is not correctly
engaged. Engage the seat again.
Removing the seat/bunk combination
%
In vehicles with a seat rail system, carry out
the release, removal and subsequent reinstal-
lation of a rear bench seat only at the marked
basic setting.
#
If necessary, remove the bed extension
( / page 89).
#
Remove the stowage compartments
(
/
page 97).
#
Fold the release handle for rear seat anchor-
age 1 up.
#
Tilt the seat/bunk combination forward using
the upper edge of the seat backrest.
Seats and stowage
91
T447 0414 02