Tyres
R17
Tyres
Light-alloy wheels
245/55 R17 XL 106H
7 J x 17 H2 ET 51
R18 (only vehicles with air suspension and a permissible axle load of 1,750 kg on the rear axle).
Tyres
Light-alloy wheels
245/50 R18 XL 104H
7.5 J x 18 H2 ET 52
Spare wheel
Notes on the emergency spare wheel and spare
wheel
Spare wheel: wheel and tyre dimensions as well as
the type of tyre correspond to the other fitted
wheels.
%
A label with the limit speed and tyre pressure
can be found on the emergency spare wheel.
A fitted spare wheel changes the driving character-
istics and bears risks.
&
WARNING Risk of accident due to incor-
rect wheel and tyre dimensions
The spare wheel can significantly impair the
driving characteristics of the vehicle.
To prevent hazardous situations:
#
Adapt your driving style accordingly and
drive carefully.
#
Never fit more than one spare wheel that
differs in size to the wheel being
replaced.
#
Only use the spare wheel briefly.
#
Have a spare wheel of a different size
replaced at the nearest qualified special-
ist workshop. It is essential that the new
wheel and tyre have the correct dimen-
sions and that the correct tyre type is
observed.
R
When using a spare wheel (different from the
wheel to be replaced), you must not exceed a
top speed of 80 km/h.
R
The tyre pressure of the spare wheel must be
checked before starting a journey and, if nec-
essary, adjusted (
/
page 237).
R
Have the spare wheel replaced by a qualified
specialist workshop.
The following should be checked regularly, particu-
larly prior to long journeys:
R
the secure positioning of the spare wheel
R
the tyre pressure of the spare wheel (adjust
the tyre pressure if necessary) (
/
page 237)
R
the fastenings of the spare wheel holder
The spare wheel is located in a spare wheel holder
under the rear of the vehicle.
Replace the tyres after six years at the latest,
regardless of wear. This also applies to the spare
wheel.
%
If you have fitted a spare wheel, the tyre pres-
sure monitor will not function for this wheel.
The spare wheel is not equipped with a sensor
for monitoring tyre pressure.
Fitting and removing the spare wheel
Removing the spare wheel under the rear of the
vehicle
#
Take the wheel wrench and auxiliary tool for
the spare wheel lifter out of the vehicle tool kit
(
/
page 233).
#
Carefully prise off cover cap
1
with a suitable
tool, e.g. a screwdriver. Be careful not to dam-
age the paintwork or the covering cap when
doing so.
Wheels and tyres 245
T447 0414 02
Содержание EQV 2021
Страница 1: ...EQV Owner s Manual T447 0414 02 ...
Страница 7: ...T447 0414 02 ...