Replacing rear bulbs
▌
Overview of rear light source types
1
Third brake light: LED
2
Licence plate lighting: LED
3
Rear fog light (driver's side): LED
4
Reversing light: W 16 W
5
Brake light, tail light/parking lights: LED
6
Turn signal light: LED
▌
Replacing light sources in the tail lamp
Requirements
R
The lighting system is switched off.
R
Standard tail lamp: you require a P 21 W light
source.
R
LED tail lamp: you require a W 16 W light
source.
Removing the tail lamp
*
NOTE Damage to the paintwork during tail
lamp removal
The paintwork may be damaged when the tail
lamps are removed. The tail lamp may, for
example, scratch the paintwork when it is
removed.
#
Remove the tail lamps carefully.
#
Mercedes-Benz recommends having the
tail lamp light sources replaced at a
qualified specialist workshop.
Please note that you can change the bulb of the
reversing light only in the case of an LED tail lamp.
#
Open the tailgate.
%
You will find a screwdriver in the vehicle tool
kit (
/
page 233).
#
Unscrew two side screws
1
.
#
Push tail lamp
2
outwards against bolts
3
as far as it will go.
#
Press tail lamp
2
off outwards and away from
bolts
3
.
#
Pull the connector off the bulb mount of tail
lamp
2
.
Installing the tail lamp
#
Push the connector into the bulb mount of tail
lamp
2
.
#
Push tail lamp
2
onto bolts
3
from the side
and press it against the vehicle.
#
Tighten two side screws
1
.
Standard tail lamp
#
Unscrew three screws
1
and remove bulb
mount
2
from the tail lamp.
112 Light and vision
T447 0414 02
Содержание EQV 2021
Страница 1: ...EQV Owner s Manual T447 0414 02 ...
Страница 7: ...T447 0414 02 ...