Mercedes-Benz EQV 2021, Руководство пользователя

Страница: 221 / 300

*
NOTE Damage to the vehicle due to auto-
matic braking
When the following functions are activated, the
vehicle brakes automatically in certain situa-
tions:
R
Active Brake Assist
R
Active Distance Assist DISTRONIC
R
HOLD function
To avoid damage to the vehicle, deactivate
these systems in the following or similar situa-
tions:
#
when towing
#
in a car wash
*
NOTE Damage due to unsuitable car wash
#
Before driving into a car wash make sure
that the car wash is suitable for the vehi-
cle dimensions.
#
Ensure there is sufficient ground clear-
ance between the underbody and the
guide rails of the car wash.
#
Ensure that the clearance width of the
car wash, in particular the width of the
guide rails, is sufficient.
To avoid damage to your vehicle, observe the fol-
lowing before using an automatic car wash:
R
Active Brake Assist is deactivated.
R
Active Distance Assist DISTRONIC is deactiva-
ted.
R
The HOLD function is switched off.
R
The side windows and roof are completely
closed.
R
The outside mirrors are folded in and an addi-
tional antenna is removed, if present.
R
The climate control blower is switched off.
R
The windscreen wiper switch is in position
g
.
If the vehicle is very dirty, wash off excess dirt
before cleaning the vehicle in an automatic car
wash.
After leaving the car wash, pay attention to the fol-
lowing:
R
The outside mirrors are fully folded out again
and an additional antenna is mounted again, if
present.
R
Remove wax residues on the windscreen and
wiper rubbers to prevent smearing and reduce
wiper noise.
Remove wax residues from the camera lens in
vehicles with a reversing camera (
/
page 221).
Notes on use of a high-pressure cleaner
&
WARNING Risk of an accident when using
high-pressure cleaners with round-spray
nozzles
The water jet can cause externally invisible
damage.
Components damaged in this way may unex-
pectedly fail.
#
Do not use a high-pressure cleaner with
round-spray nozzles.
#
Have damaged tyres or chassis parts
replaced immediately.
* NOTE Damage to component parts due to
improper high-pressure cleaning
Components can be damaged if the distance
of the high-pressure nozzle is too small.
#
Maintain a minimum distance of about
30 cm between the high-pressure nozzle
and car parts.
#
Do not use a high-pressure cleaner with
a round-spray nozzle.
#
Keep the water jet moving constantly
while cleaning.
#
Do not clean the following components
with the high-pressure cleaner:
R
electrical components
R
plug connectors
R
reversing camera
R
drivetrain
R
seals
R
hoses
Maintenance and care 219
T447 0414 02