#
Press button
5
.
R
LIM indicator lamp
2
off: cruise control is
selected.
R
LIM indicator lamp
2
lit: the variable lim-
iter is selected.
Storing and maintaining the current speed
#
Briefly press the cruise control lever up
1
or
down
4
.
The current speed is stored and the vehicle
maintains this speed (cruise control) or does
not exceed it (variable limiter).
When you activate cruise control, the stored speed
is briefly shown in the text field of the instrument
cluster display. The display also shows the
¯
symbol and the stored speed.
When you activate the variable limiter, the instru-
ment cluster display briefly shows the stored
speed. The display also shows the
È
symbol
and the stored speed.
%
For vehicles with Active Distance Assist
DISTRONIC, the segments between the start
of the scale and the stored speed light up in
the speedometer dial instead.
Calling up the stored speed
&
WARNING Risk of accident due to stored
speed
If you call up the stored speed and this is lower
than your current speed, the vehicle deceler-
ates.
#
Take into account the traffic situation
before calling up the stored speed.
#
Briefly pull the cruise control lever in direction
3
.
The last stored speed is called up and the vehi-
cle maintains this speed (cruise control) or
does not exceed it (variable limiter).
If the last stored speed has previously been
deleted, the currently driven speed is stored.
%
When you switch off the vehicle, the last speed
stored is cleared.
Increasing or reducing the speed
#
Press the cruise control lever up
1
or down
4
as far as the 1st pressure point.
The stored speed is increased or reduced by
1 km/h.
or
#
Press the cruise control lever up
1
or down
4
beyond the 1st pressure point.
The stored speed is increased or reduced by
10 km/h.
If you have set
Miles
as the unit for the digital
speedometer, you can maintain any speed from
20 mph (cruise control) or set it as the limit speed
(variable limiter). You can then set the limit speed
in increments of 1 mph and 5 mph.
Deactivating cruise control or the variable limiter
#
Briefly press the cruise control lever forwards
6
.
or
#
Press button
5
.
The
¯
or
È
symbol and the stored
speed in the instrument cluster display then go
out.
%
Cruise control is deactivated in the following
situations:
R
you apply the brakes.
R
you drive below a speed of 20 km/h.
R
you shift the transmission to position
i
.
R
ESP
®
intervenes.
In these cases the variable limiter remains
activated.
If you deactivate ESP
®
, or ABS or ESP
®
is mal-
functioning, cruise control and the limiter are
deactivated.
If cruise control automatically deactivates, a warn-
ing tone sounds and the
Cruise control off
mes-
sage appears briefly in the instrument cluster dis-
play.
Active Distance Assist DISTRONIC
▌
Function of Active Distance Assist DISTRONIC
Active Distance Assist DISTRONIC maintains the
set speed on free-flowing roads. If vehicles ahead
are detected, the set distance is maintained, if
necessary until the vehicle comes to a halt. The
vehicle accelerates or brakes, depending on the
distance to the vehicle in front and the set speed.
The speed and distance to the vehicle in front are
set and saved using the cruise control lever. The
speed can be set in the range between 20 km/h
and 200 km/h.
Other features of Active Distance Assist
DISTRONIC:
R
Depending on the preselected distance,
DISTRONIC intervenes either dynamically
154 Driving and parking
T447 0414 02
Содержание EQV 2021
Страница 1: ...EQV Owner s Manual T447 0414 02 ...
Страница 7: ...T447 0414 02 ...