Mercedes-Benz EQV 2021, Руководство пользователя

Страница: 78 / 300

Guide rails 1 of the seat rail system can be used
for the following purposes:
R
For mounting up to two rear seat rows
R
For mounting both rear seat rows facing one
another
R
For mounting rear seats and rear bench seats
R
For moving rear seats and rear bench seats
%
When you remove a rear bench seat or a seat,
the seat slider may slide into a guide rail. The
seat sliders will then no longer be parallel in
the guide rails. In this case, you will no longer
be able to fit the respective seating. The seat
sliders must be moved only using a special
tool or at a qualified specialist workshop in
order to prevent the risk of damage. The tool
is available as a Mercedes-Benz accessory or
as part of a seat/bunk combination.
Seating variants
&
WARNING Risk of injury due to incorrect
installation of the rear bench seats
If the rear bench seats are incorrectly installed,
the integrated safety precautions in the rear
bench seats cannot work as intended.
#
Install the rear bench seats only as
described.
#
Only use rear bench seats approved for
your vehicle.
Depending on the type of seat anchorage in the
vehicle floor, you can install the following seating
variants:
R
Rear bench seats with two or three seats
R
Single rear seats
R
Seat/bunk combination with three seats
Depending on the vehicle equipment, you can fit
the rear bench seats and the rear seats on the first
and/or second rear seat row.
The seating variants shown are permitted only if
the conditions specified below for safe rear seating
are met. Other seating variants are not permitted
and may endanger the occupants.
When using only the individual seats, the rear seats
can be installed facing in the direction of travel in
all combinations and configurations.
Seating variants facing in the direction of travel
Seating variants for the rear bench seats in the
face-to-face position
76
Seats and stowage
T447 0414 02