Mercedes-Benz EQV 2021, Руководство пользователя

Страница: 68 / 300

Requirements:
R
The power supply has been switched on.
Reversing function of the roller sunblind
You can open and close the roller sunblind only
when the sliding sunroof is closed.
The roller sunblinds are fitted with an automatic
reversing function. If a solid object prevents or hin-
ders the closing process, the roller sunblind will
open again automatically. The automatic reversing
function is only an aid and is not a substitute for
your attentiveness in the process of closing the
roller sunblinds.
#
When closing the roller sunblind, make sure
that no body parts are in the range of move-
ment.
&
WARNING Risk of becoming trapped
despite reversing function
In particular, the reversing function will not
react:
R
to soft, light and thin objects, e.g. fingers
R
when you close the roller sunblind again
manually immediately after automatic
reversing
#
When closing the roller sunblind, make
sure that no body parts are in the range
of movement.
#
Release the button immediately if some-
body becomes trapped.
or
#
Press the button in any direction during
the automatic closing process.
The closing process will be stopped.
Opening and closing roller sunblinds
You can close the roller sunblinds only when the
sliding sunroof is closed.
#
To open: press the
3
button.
The roller sunblinds will open, and the sliding
sunroof will then be raised into the vent posi-
tion.
or
#
Pull back the
3
button.
The roller sunblinds will open.
#
To close: pull down the
3
button.
When the sliding sunroof is closed, the roller
sunblinds will close.
If you push or pull the
3
button beyond the
point of resistance and release it, you will start
automatic operation in the direction in question.
You can stop automatic operation by pushing or
pulling the button again.
Opening and closing roller sunblinds from the rear
#
Push or pull button 1 to the point of resist-
ance and hold it until the roller sunblind or the
sliding sunroof has reached the desired posi-
tion.
#
Automatic operation: push or pull button 1
beyond the point of resistance and release it.
With the sliding sunroof, a complete opening or
closing process will always pass through "vent
position", a fixed intermediate position. You will
need to operate button 1 twice to execute a
complete opening or closing process.
66
Opening and closing
T447 0414 02