Mercedes-Benz EQS 2023, Руководство оператора

Страница: 49 / 590

R
Never secure objects with a seat belt if the
seat belt is also being used by one of the vehi-
cle's occupants.
Also ensure that no objects, e.g. a cushion,
are ever placed between a person and the
seat.
Fastening and adjusting seat belts
If the seat belt is pulled quickly or sharply, the
seat belt retractor locks. The seat belt strap can-
not be pulled out any further.
Vehicles with illuminated design seat belt buckles:
the illumination on the seat belt buckle does not
indicate that the seat belt buckle is functioning
correctly.
#
Always engage seat belt tongue 1 of the seat
belt in seat belt buckle 2 of the correspond-
ing seat.
#
To adjust the seat belt height: press button 3
on the seat belt outlet and slide the seat belt
outlet to the desired position.
#
To engage the seat belt outlet: release button
3 and ensure that the seat belt outlet
engages.
* NOTE Deployment of components of the
restraint system when the front passenger
seat is unoccupied and a seat belt is
buckled
When the front passenger seat is unoccupied
and the seat belt tongue of the seat belt is
engaged in the seat belt buckle, components
of the restraint system may deploy unnecessa-
rily on the front passenger side, e.g. the Emer-
gency Tensioning Device.
#
Only buckle the seat belts as intended.
Function of the restraint system warning lamp
When the vehicle is switched on, a self-test is per-
formed, during which the restraint system warning
lamp
6
lights up. It goes out no later than a
few seconds after the vehicle is started. The com-
ponents of the restraint system are then func-
tional.
Occupant safety 47