Mercedes-Benz EQS 2023, Руководство оператора

Страница: 210 / 590

start/stop function was deactivated, an additional
prompt appears asking if the function should
remain deactivated.
%
The prompt only appears if the previously
active settings deviate from the standard set-
tings.
Function off: the next time the vehicle is started
the A drive program is set automatically. The
ECO start/stop function is activated automati-
cally.
Configuring DYNAMIC SELECT in the MMS (plug-
in hybrid)
Multimedia system:
4
©
5
Settings
5
Vehicle
5
DYNAMIC SELECT
Setting drive program I
#
Select = Individual .
#
Select and set a category.
Setting the H drive program
#
Select Hybrid .
#
Select Route Based or Standard .
If route guidance is active and the Route
Based option has been activated, the electri-
cal energy is distributed intelligently over the
entire route. In built-up areas, electric mode is
preferred, while on the freeway the combus-
tion engine is used.
With the
Standard option, the vehicle drives in
its standard drive program ( Î Electric or
n Hybrid ). There is no distribution of elec-
trical energy over the entire route. The high-
voltage battery is exhausted and the vehicle is
then driven by the combustion engine.
Switching the reset display on/off
#
Activate or deactivate Request at Start .
%
This function must be activated for each user
profile separately. The drive program for the
respective user profile of the last driver is only
stored if this function is activated.
Function on: the next time the vehicle is started a
prompt appears asking whether the last active
drive program should be restored.
%
The prompt only appears if the previously
active settings deviate from the standard set-
tings.
Function off: if the
Î
drive program was the
last one active, and all requirements for the drive
program are fulfilled, this will be automatically
selected the next time the vehicle is started. If
another drive program was active, then the n
drive program is set automatically.
Function off: the next time the vehicle is started
the A drive program is set automatically.
Displaying vehicle data
Multimedia system:
4
©
5
Info
#
Select Vehicle .
The vehicle data is displayed.
208 Driving and parking