Mercedes-Benz EQS 2023, Руководство оператора

Страница: 224 / 590

%
If the vehicle is idle for lengthy periods and
connected to the mains supply, the high-volt-
age battery will be recharged automatically as
needed or when electrical consumers are
activated (e.g. pre-entry climate control).
Ending the alternating current charging process
(mode 2/3)
Requirements
R
The distance between the SmartKey and the
vehicle does not exceed 3 ft (1 m).
#
Press charging interruption button 2 .
The charging process is ended. Status display
1
lights up white. The vehicle socket is
unlocked.
#
Press and hold button 3 on the charging
cable connector and remove the charging
cable connector from the vehicle socket.
%
If you cannot remove the charging cable con-
nector, repeat the unlocking procedure. If the
charging cable connector is still locked, con-
tact a qualified specialist workshop.
% Status display 1 remains lit for some time
after the charging cable connector has been
removed and then goes out.
#
Close the socket flap.
For vehicles with an electric socket flap,
observe the following notes on closing the
socket flap.
#
Remove the charging cable connector from
the mains socket, or from the socket on the
wallbox/charging station, and stow the vehi-
cle's charging cable safely in the vehicle
(
/
page 213).
The electric socket flap closes automatically in
the following situations:
R
shortly after the charging cable connector has
been removed
R
after the socket flap has been tapped in the
direction to close it
R
after transmission position
i
,
h
or
k
has
been engaged
222 Driving and parking