Mercedes-Benz EQS 2023, Руководство оператора

Страница: 415 / 590

displayed, the vehicle may not be loaded or
unloaded.
#
If required, raise the vehicle to transport
level again.
#
A vehicle that cannot be raised to trans-
port level may not be loaded or unloaded
using a ramp. Consult a qualified special-
ist workshop.
&
WARNING Risk of accident due to activa-
ted transport level
If the vehicle is raised to transport level, driv-
ing and driving safety systems have only limi-
ted availability and the view from the vehicle is
restricted.
Driving safety is severely restricted and there
is a risk of an accident!
#
Do not use transport level in normal road
operation.
#
Only activate and use transport level to
load the vehicle and when not on public
roads.
#
Ensure that no persons or obstacles are
located in the area surrounding the vehi-
cle.
Raising the vehicle to transport level
#
Press the G button for at least five sec-
onds.
#
Immediately press and hold the
a
button
for at least one second.
The
For Transport Level Switch On Vehicle
message is displayed.
#
Select vehicle transport .
%
The noise certification mode is intended
exclusively for the technical test organization.
It restricts the drive power of the vehicle and
must not be used in customer operation.
#
Switch on the vehicle(
/
page 193).
The transport settings are displayed.
#
Swipe downward to select Transport Level
and press
a
.
The vehicle is raised and the Vehicle raising...
Do not drive onto ramp yet message is dis-
played for 5 seconds. The raising process can
last up to 60 seconds and can be canceled
with the G button.
#
When raising, do not switch off the vehicle.
While the vehicle is being raised, you can maneu-
ver at a maximum speed of 25 mph (40 km/h).
Breakdown assistance 413