Mercedes-Benz EQS 2023, Руководство оператора

Страница: 226 / 590

#
If you feel there is increased resistance,
pull the charging cable connector out of
the socket and reinsert it.
Requirements
R
The transmission is in position
j
.
R
The vehicle is unlocked or the distance
between the key and the vehicle does not
exceed 3 ft (1 m).
R
The vehicle has not been started. The
õ
indicator on the driver's display is off.
R
The charging cable is not taut.
#
Open socket flap 1 via the EQ module of the
multimedia system (
/
page 331).
or
#
Press the center rear section of socket flap
1 .
Socket flap 1 will swing open and status dis-
play 2 will light up white.
Vehicles with an electrical socket flap: if an obsta-
cle impedes the socket flap while it is opening,
the socket flap will close again automatically.
%
When the vehicle is started (the
õ
indica-
tor is lit up on the driver's display), socket flap
1 cannot be opened.
#
Remove socket cover 4 from the lower con-
nection of vehicle socket 3 .
% The CCS charging cable connector requires
both vehicle socket connections 3 .
#
Insert the charging cable connector into vehi-
cle socket 3 as far as it will go.
Make sure that the charging cable is not taut
when inserted.
Status display
2 will flash orange and, as
soon as the high-voltage battery is charged,
blue.
%
When the charging sequence for the ambient
lighting is activated, the ambient lighting will
light up for approximately 30 seconds as with
status display 2 (
/
page 164).
224 Driving and parking