Mercedes-Benz EQS 2023, Руководство оператора

Страница: 229 / 590

Configuring the charging settings
Multimedia system:
4
©
5
EQ
5
Charging
Setting the charging program
#
Select Home , Work or Standard .
Opening and closing the socket flap using the
MMS
#
Press Open socket flap to open the socket
flap.
#
The charging process can be interrupted using
Stop Charging
. The charging process is ended
and the charging cable is unlocked.
#
Press Close socket flap to close the socket
flap. The socket flap also closes automatically
when the transmission is shifted out of posi-
tion
j
. The socket flap also closes automati-
cally after one minute if it has been opened
but no plug has been inserted, and ten to fif-
teen seconds after the plug has been
removed.
%
Further notes on charging with alternating
current: (
/
page 219) or direct current:
(
/
page 223).
Unlocking the charging cable (mode 3 or 4)
When the function is active, the charging cable is
unlocked when the maximum charge level is
reached.
#
Select Home or Work .
#
Activate or deactivate Unlock Charging Cable .
Activating or deactivating location-based charging
#
Select Charge at home or Charge at work .
#
Activate or deactivate Select Based on Loca-
tion .
When the function is activated, the vehicle's cur-
rent position is saved as one of the selected
options. When the address is reached again, the
charging program is automatically switched over
as soon as parking position
j
is engaged.
Activating or deactivating ECO charging
#
Activate or deactivate the function.
The ECO charging function limits the charging
voltage at charging stations to conserve the vehi-
cle's battery.
Setting the departure time
The set departure times are used for the vehicle's
pre-entry climate control and for predictions
regarding the approximate state of charge and
range at the time selected. The charging process
always starts immediately, irrespective of the next
departure time.
#
Select Departure Time .
The following charging times can be selected:
R
individual charging times
R
a Week Profile
Setting an individual departure time
#
Select Add New Time and set a new depar-
ture time.
or
#
Select ´ and adapt an existing departure
time.
Driving and parking 227