Mercedes-Benz EQS 2023, Руководство оператора

Страница: 407 / 590

#
Affix part
1
of the TIREFIT sticker to the
instrument cluster within the driver's field of
vision.
#
Affix part 2 of the TIREFIT sticker near the
valve on the wheel with the defective tire.
#
Pull plug 4 with the cable and hose 5 out
of the tire inflation compressor housing.
#
Push the plug of hose
5
into flange
6
of tire
sealant bottle
1
until the plug engages.
#
Place tire sealant bottle 1 head downwards
into recess 2 of the tire inflation compressor.
#
Remove the valve cap from valve 7 on the
faulty tire.
#
Screw filling hose 8 onto valve 7 .
#
Insert plug 4 into a 12‑V‑socket in your vehi-
cle.
#
Switch on the vehicle.
#
Switch on the tire inflation compressor using
On/Off switch 3 .
The tire is inflated. First, tire sealant is pum-
ped into the tire. The pressure may briefly rise
to approximately 500 kPa (5.0 bar/73 psi).
Do not switch off the tire inflation compressor
during this phase!
#
Let the tire inflation compressor run for a max-
imum of ten minutes.
The tire should then have attained a tire pres-
sure of at least 200 kPa (2.0 bar/29 psi).
If tire sealant leaks out, make sure you clean the
affected area as quickly as possible. It is prefera-
ble to use clean water.
If you get tire sealant on your clothing, have it
cleaned as soon as possible with perchloroethy-
lene.
If, after ten minutes, a tire pressure of 200 kPa
(2.0 bar/29 psi) has not been attained:
#
Switch off the tire inflation compressor.
#
Unscrew the filling hose from the valve of the
defective tire.
Breakdown assistance 405