Mercedes-Benz EQS 2023, Руководство оператора

Страница: 443 / 590

The wear patterns on the front and rear wheels
differ:
R
Front wheels wear more on the tire shoulder
R
Rear wheels wear more in the center of the
tire
Do not drive with tires that have too little tread
depth. This significantly reduces traction on wet
roads (hydroplaning).
On vehicles that have the same size front and rear
wheels, rotate the wheels according to the inter-
vals in the tire manufacturer's warranty book in
your vehicle documents. If this is not available,
rotate the tires every 3,000 to 6,000 miles
(5,000 to 10,000 km), depending on the wear.
Ensure that the direction of rotation is main-
tained.
Notes on storing wheels
When storing wheels, observe the following notes:
R
After removing wheels, store them in a cool,
dry and preferably dark place.
R
Protect the tires from contact with oil, grease
or fuel.
Overview of the tire-change tool kit
Apart from some country-specific variants, vehi-
cles are not equipped with a tire-change tool kit.
Consult a qualified specialist workshop to find out
which wheel change tools are necessary and
approved for changing the wheel on your vehicle.
You require the following tools, forexample, to
change a wheel:
R
Jack
R
Chock
R
Lug wrench
R
Alignment bolt
The tire-change tool kit is located in tool bag 1
in the cargo compartment.
% When stowing the tool bag, make sure that it
is adequately secured.
The tool bag contains:
R
Jack
R
Gloves
R
Lug wrench
R
Alignment bolt
R
Folding chock
R
Ratchet for jack
Preparing the vehicle for a wheel change
Requirements
R
The vehicle is not on a slope.
Wheels and tires 441