Mercedes-Benz EQS 2023, Руководство оператора

Страница: 74 / 590

#
If the child is secured in a LATCH-type
(ISOFIX) child restraint system with inte-
grated seat belt, the total mass of the
child and child restraint system must not
exceed 73 lb (33 kg).
Always comply with the information about the
mass of the child:
R
in the manufacturer's installation and operat-
ing instructions for the child restraint system
used
R
on a label on the child restraint system, if
present
Regularly check that the permissible gross mass
of the child and child restraint system is still com-
plied with.
When installing a child restraint system, observe
the following:
O
Always observe the correct use of the seats
and consider their suitability for attaching a
child restraint system.
ISOFIX mounting brackets
#
Before every journey, make sure that the ISO-
FIX child restraint system is correctly engaged
in both mounting brackets in the vehicle.
* NOTE Damage to the seat belt for the cen-
ter seat during installation of the child
restraint system
#
Make sure that the seat belt is not trap-
ped.
#
Fold upholstered lining
1
upwards.
#
Pull the tab on upholstered lining 1 upwards
and position it on the support surface.
Upholstered lining 1 will remain folded
upwards.
#
Attach the ISOFIX child restraint system to
both mounting brackets 2 in the vehicle.
#
To close, fold upholstered lining 1 upwards.
#
Lift the tab from the support surface and slide
it back into the upholstery slot between the
seat backrest and seat cushion. Close the
upholstery flap.
Fastening a Top Tether
&
WARNING Risk of injury or death if the
rear seat backrests are not locked after
Top Tether belts are installed
The rear seat backrests may fold forwards
when you are driving.
As a result, child restraint systems will no lon-
ger be able to perform their intended protec-
72 Safely transporting children in the vehicle