Cover of the jack support points
Before positioning the jack, you must remove the
covers for the jack support points.
#
To remove: turn clip
1
on the cover one
quarter turn and remove.
#
Pull the cover downwards using handle
2
until the cover releases at the top of the longi-
tudinal member panel.
#
Remove the cover.
Cover of the jack support points
#
To install: insert tabs
3
of the cover into the
recesses of the longitudinal member panel
and press the covers closed.
#
Insert retaining clip
1
into the cover, as
shown in the illustration, until you hear it
engage in the floor bush.
Make sure that the floor bush in the vehicle is
correctly aligned to the cover.
&
WARNING Risk of injury from incorrect
positioning of the jack
If you do not position the jack correctly at the
appropriate jacking point of the vehicle, the
jack could tip with the vehicle raised.
#
Only position the jack at the appropriate
jacking point of the vehicle. The base of
444 Wheels and tires
Содержание EQS 2023
