Mercedes-Benz EQS 2023, Руководство оператора

Страница: 364 / 590

3
Distance from current vehicle position and
remaining driving time
4
Searches for an additional charging station
EQ module (expanded view)
1 Sets the charging program (
/
page 227)
2
Current condition of charge of the high-volt-
age battery
3
Maximum condition of charge (depending on
the setting)
4
Sets the next charging break (to use a less
expensive tariff)
5 Sets the departure time
6
Opens the socket flap
7 Activates or deactivates ECO charging
Overview of the toll system
%
The toll system is optional equipment and is
not available in all vehicles.
Debiting of toll charges at freeway toll gates is
facilitated with an electronic payment system.
The toll system uses RFID (Radio Frequency Iden-
tification) for data transfer between the control
unit and the toll station.
The toll system is initially switched off at the fac-
tory.
The control unit is in the vehicle glove box.
In order to be able to use the toll system, it must
have been registered by the customer and activa-
ted by the service provider:
R
Activate the toll system in the settings of the
MBUX multimedia system or on the control
unit.
R
There are two ways to register and activate:
-
In the Mercedes me App, register the unit
identification number of the control unit
and activate the toll system.
-
Alternatively, you can register and activate
via the Toll Service app.
Activation of the toll system can take up to
48 hours after registration.
When the toll system is activated, the automatic
detection of the number of vehicle occupants is
initially switched off at the factory. The number of
vehicle occupants is preset with one person.
In order to use the toll system, the device in the
glove box or in the MBUX multimedia system must
be switched on.
362 MBUX multimedia system