Mercedes-Benz EQS 2023, Руководство оператора

Страница: 36 / 590

partment at low speeds and does not represent a
malfunction.
Notes on mounting the license plate on the front
license plate holder
* NOTE Malfunctions and system failures
due to incorrect mounting of the license
plate on the front license plate holder
If the license plate is incorrectly mounted on
the front license plate holder, sensors, cam-
eras or driving and safety systems may mal-
function or fail.
Observe the following points when mounting
the license plate on the front license plate
holder:
#
Mount the license plate directly on the
license plate holder without advertising
media or other holders.
#
Mount the license plate so that it does
not protrude above or to the side of the
license plate adapter.
Declaration of conformity for vehicle installed
radio components
USA: "Radio based devices of this vehicle comply
with Part 15 of the FCC Rules. Operation is sub-
ject to the following two conditions: 1) These devi-
ces may not cause harmful interference, and 2)
These devices must accept any interference
received, including interference that may cause
undesired operation.Changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment."
Canada: "This vehicle contains licence-exempt
transmitter(s)/receiver(s) that comply with Inno-
vation, Science and Economic Development Can-
ada’s licence-exempt RSS(s). Operation is subject
to the following two conditions: (1) These devices
may not cause interference. (2) These devices
must accept any interference, including interfer-
ence that may cause undesired operation of the
devices." "Les émetteurs/récepteurs dans cette
véhicule sont conforme aux CNR d’Innovation,
Sciences et Développement économique Canada
applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux con-
ditions suivantes : 1) Ces appareils ne doivent pas
produire de brouillage; 2) Ces appareils doivent
accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en com-
promettre le fonctionnement."
Diagnostics connection
The diagnostics connection is a technical inter-
face in the vehicle. It is used, for example, during
repair and maintenance work or for reading out
vehicle data in a specialist workshop. Diagnostic
devices should therefore only be connected in a
qualified specialist workshop.
&
WARNING Risk of accident due to con-
necting devices to the diagnostics con-
nection
If you connect devices to the diagnostics con-
nection of the vehicle, the function of vehicle
34 General notes