manualshive.com logo in svg

MEDAP WISTA SP 1070, Руководство по эксплуатации

Поделиться
Скачать
MEDAP WISTA SP 1070 Скачать руководство пользователя страница 42

Cleaning and disinfection

Disinfection

42

GA 5752 1555 DE 28

6

NOTE

Use only all-purpose cleaners which are slightly alkaline (soap solution) and which 

contain surfactants and phosphates as the active cleaning agents.
In the event of heavily contaminated surfaces, use concentrated multi-purpose 

detergent.

6.1.3 

Cleaning procedure

 

Use the correct dose of multi-purpose detergent with water for the degree of surface 

contamination and in accordance with the instructions of the detergent manufacturer.

 

Thoroughly wipe off the product with a soft cloth slightly wetted in a multi-purpose detergent 

solution.

 

Ensure that the product is free from contamination and encapsulated  particles of grime.

 

Thoroughly wipe off the product with a soft cloth dipped in clean water.

 

Ensure that the product is free of detergent residues.

 

Dry the product with a dry, absorbent and lint-free cloth.

 

This will help to reduce pathogen growth on the product's surface.

 

Wipe disinfect the product after every cleaning process.

6.2 

Disinfection

6.2.1 

General

NOTE

In the event of product surfaces that are very dirty, carry out an additional cleaning 

procedure before disinfecting.

CAUTION!

Material damage due to excessive exposure times! 
Exceeding the specified exposure time of the disinfectant may damage the 

surfaces.
Observe the specified exposure time of the disinfectant manufacturer.

NOTE

The septic fluid jar, all the components in its cap, and the tubes are consumption 

materials. Depending on the cleaning process used they are subject to greater or 

lesser wear and tear due to the materials used. Inspect all components for proper 

functionality before use. Replace them in case of any signs of damage.

NOTE

Using surgical drapes which are not colour-fast can cause discolouration in plastic 

components.

Содержание WISTA SP 1070





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды