manualshive.com logo in svg

MEDAP WISTA SP 1070, Руководство по эксплуатации

Поделиться
Скачать
MEDAP WISTA SP 1070 Скачать руководство пользователя страница 16

Safety notes

General safety notes

16

GA 5752 1555 DE 28

2

2 

Safety notes

2.1 

General safety notes

DANGER!

Danger to life! 
Danger due to unauthorised modifications.
The product may not be modified.

DANGER!

Explosion hazard!
The product does not have explosion protection and is not approved for use in 

Class AP-M hazardous locations.
Do not use the product in the AP-M area.

DANGER!

Explosion hazard!
The product must not be used for the aspiration of flammable or explosive liquids.

WARNING!

Risk of infection due to using no or a defective  hydrophobic bacterial and virus 

filter.
Secretions enter the aspirator during aspiration.
Stop using the aspirator. Clean and disinfect the aspirator and have it repaired by a 

service technician authorised by ATMOS to do so.

DANGER!

Danger to life!
For open heart operations and those to the central nervous system, there may be 

equipotential bonding between the user and the patient.
The product may not be used with components for aspiration that are metal and 

conductive. For use on open hearts and the central nervous system, CF protective 

class equipment is necessary.

DANGER!

Incorrect use can result in fatalities! 
Instructions for using components made by other manufacturers are not part of 

these operating instructions.
Ensure that the manufacturer's instructions are followed.

DANGER!

Danger to life!
Electric shock!
Check to ensure that the available mains voltage corresponds with the 

specifications on the type plate before connecting the mains plug. Product can only 

be separated from the power supply by unplugging at the socket.

Содержание WISTA SP 1070





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды