manualshive.com logo in svg

MEDAP WISTA SP 1070, Руководство по эксплуатации

Поделиться
Скачать
MEDAP WISTA SP 1070 Скачать руководство пользователя страница 36

Operation

Replacing the bacterial filter paper

36

GA 5752 1555 DE 28

4

4.2.3 

Operating the footswitch

The appliance can be transferred to energy-saving standby mode using the foot switch.

11

Fig. 27:  Foot switch

 

Operate the foot switch.

 

Aspirator is set to stand-by mode.

 

Yellow light emitting diode (1) is 

illuminated.

 

Operate the foot switch again.

 

Yellow light emitting diode goes out.

 

Aspirator is set to operating mode.

4.2.4 

Setting the vacuum shift

22

11

Fig. 28:  Vacuum shift

The vacuum shift can be set in four 

different ways

•  Arrow (1) on the rotary switch (2) of the 

vacuum shift points to the right: Suction 

material will be conducted into the septic 

fluid jar on the right.

•  Arrow (1) on the rotary switch (2) of the 

vacuum shift points to the left: Suction ma-

terial will be conducted into the septic fluid 

jar on the left.

•  Arrow (1) on the rotary switch (2) of the 

vacuum shift points forwards: Suction ma-

terial will be conducted into the septic fluid 

jars on the left and right.

•  Arrow (1) on the rotary switch (2) of the 

vacuum shift points to the back: Vacuum 

shift is switched off, aspiration process is 

halted.

4.3 

Replacing the bacterial filter paper

WARNING!

Infection hazard!
Any and all the parts of the product could be contaminated.
Wear gloves and be absolutely sure to follow the hygiene rules during all cleaning 

and reconditioning work.

Содержание WISTA SP 1070





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды