manualshive.com logo in svg

MEDAP WISTA SP 1070, Руководство по эксплуатации

Поделиться
Скачать
MEDAP WISTA SP 1070 Скачать руководство пользователя страница 38

Taking the unit out of operation

Completing the aspiration process

38

GA 5752 1555 DE 28

5

5 

Taking the unit out of operation

5.1 

Completing the aspiration process

 

Remove the tube from the patient.

 

Switch off the aspirator.

 

Empty the septic fluid jar.

 

Clean the components.

5.2 

Emptying the septic fluid jar

DANGER!

Infection hazard! 
Any and all of the components in the septic fluid jar might be contaminated.
Always wear gloves when emptying the septic fluid jar and be absolutely sure to 

follow the hygiene rules.

CAUTION!

Property damage!
If the septic fluid jar is held by the septic fluid jar cover (REF 5752 5432) the septic 

fluid jar may fall. Do not hold the septic fluid jar by the cap. Do not hold the septic 

fluid jar by the cap.

NOTE

Monitor the filling level in the septic fluid jar before and after aspiration and, if larger 

volumes are being extracted, during aspiration.
When the maximum filling level is reached, switch off the aspirator and empty the 

septic fluid jar.

Содержание WISTA SP 1070





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды