MEDAP WISTA SP 1070, Руководство по эксплуатации

Страница: 14 / 60

Introduction
Basic requirements
14
GA 5752 1555 DE 28
1
Technical specifications
• Vacuum resistant down to -95 kPa (may not collapse)
Prerequisites
• Must be equipped with an overflow protection device or must be connected to an external
overflow protection system.
• Low leakage.
• Capacity of 1 l to 5 l.
• Always fix septic fluid jars firmly and ensure safe connection to the equipment rail 25 x 10 mm.
• The outer diameter of the tube connector on the patient side should match the inner diameter
of the suction tube.
1.4.5.4 Suction tube
The suction tube is used to connect the tube connector on the septic fluid jar cap on the patient
side and the utensil.
Technical specifications
• Shore hardness of 60
• Internal diameter of 6-8 mm
• Length 1.3–3.0 m
• Vacuum resistant down to -95 kPa
Prerequisites
• The suction tube must comply with the hospital's standards for hygiene.
• The suction tube may not collapse.
• The outer diameter of the tube connector on the patient side of the septic fluid jar cap must
match the inner diameter of the suction tube.
1.4.5.5 Utensil
The suction catheter, lance, or Yankauer suction tip etc. are referred to as utensils. The utensils
are used to extract septic fluids.
Prerequisites
• The inner diameter of the utensil's connector must match the outer diameter of the suction
tube.
• The utensil must be sterilisable or a sterile single-use item.
• Biocompatibility.
1.4.5.6 Rinsing fluid jar
Any container may be used as rinsing fluid jar.
Prerequisites
• The rinsing fluid jar must have a capacity of less than 250 ml.
• The rinsing fluid jar shall be easy to clean and disinfect.
1.4.5.7 Bacterial filter paper
The bacterial filter paper prevents the ambient air from contamination. Only bacterial filter papers
(REF 5750 5045) must be used.