MEDAP WISTA SP 1070, Руководство по эксплуатации

Страница: 23 / 60

Initial operation
Mounting the tube holder
GA 5752 1555 DE 28
23
3
3.4 Mounting the tube holder
The tube holders are screwed into place on the right and left sides of the equipment rail.
22
33
11
44
Fig. 8: Mounting the tube holder

Press the tube holder (1) with the open side
upwards to the equipment rail (2).

The threaded holes (3) of the tube
holder are above the threaded holes of
the equipment rail.

Insert the screws (4) into the threaded
holes.

Tighten tube holder using a screwdriver.
3.5 Mounting the foot switch
1
2
3
Fig. 9: Mounting the foot switch

Insert the cable end (1) into the cap nut (2).

Insert the cable end into the tube connector
(3) on the aspirator.

Tighten the cap nut.

The foot switch is mounted.
3.6 Overflow protection device/tube connector
The aspirator can be operated either with an overflow protection device or with a tube connector
and downstream overflow protection.
WARNING!
Infection hazard due to oversuction!
To protect the aspirator from oversuction, the aspirator may only be operated with
the overflow protection in place.