Matrix NAVAN CNX200, Системное руководство

Страница: 377 / 1388

Matrix NAVAN CNX200 System Manual 367
Default: Forward only Trunk calls.
This parameter is relevant for the features “Call Forward” and “Mobility Extension” .
More Features
1.
Click More... link to expand.
Call Appearance
1.
Set the number of Call Appearances for the SIP extension. Default: 2
A Call Appearance allows an extension user to attend to more than one calling party at a time. A minimum
of two Call Appearances must be assigned to a SIP extension - Operator extension or Executive extension
- so that the extension user can put one party on hold while talking to another. A third Call Appearance
allows the extension user to put two calls on hold, make/attend a third call and toggle between three calls.
The more the number of Call Appearances assigned to an extension, the more the number of calls the
extension user can handle simultaneously.
The NAVAN supports a maximum of 8 Call Appearances on SIP extensions.
SIP extensions for Executives are usually assigned 2 Call Appearances, while the Operator extension is
assigned 6 Call Appearances to handle 6 calls simultaneously.
Call Waiting Tone
1.
During an on-going conversation, if there is a second incoming call, the system plays beeps to indicate the
second incoming call. You can set the frequency of the
Call Waiting Tone (SPARSH VP248 and
SPARSH VP310) beeps as per your requirement. You can select from the options:
• OFF
• Beep Once